Smeg SE2642ID2 manual Instructions for assembly

Page 16

Instructions for assembly

Type

•Insert the hob and align it.

•From the bottom, insert the brackets with screws in the holes provided for fastening the brackets, align the brackets and screw them tight.

•Tighten the screws with a hand screw driver only; do not use a battery-operated screw driver.

•In the case of thin worktops make sure that the brackets are correctly positioned. A metric screw must be used on the bracket to balance it.

Important!

There is a risk of breakage if the hob is canted or subjected to stress during installation!

Minimum distance to adjacent walls

Cut-out dimension

Outer dimensions of the hob

Cable routing in rear wall Installation height

Image 16

Contents 225146 O91 Disposing of the packaging Disposing of old appliancesCorrect use For your informationSafety instructions Connection and operationFor the hob For personsAppliance description Operating the hob with the touch keysOperation How to cut power consumption Power settingsCookware for induction hobs Residual heat displaySwitching on the hob and cooking zones Switching off a cooking zoneSwitching off the hob Operating the buttonsSwitching on the child-safety lock Stop functionChildproof lock Press the on/off buttonAutomatic switch-off timer Minute minder egg timerPower setting Automatic boost functionKeeping warm function if available 048Power management Power boost setting cooking zones marked with a PCleaning and Care Cleaning after useWeekly clean Specific soilingWhat to do if trouble occurs Instructions for assembly Safety instructions for kitchen unit fittersInstallation VenilationClips BracketInstructions for assembly Electrical connection Technical dataStart of operation