Operation
Suitable for induction cooking
Cooking zone selection buttons | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Operating the buttons
The controls described here expect the pressing of a (selection) button to be followed by the pressing of a subsequent button.
The pressing of a subsequent button must always commence within 10 seconds, otherwise the selection will be deleted.
The plus and minus buttons can be touched individually or be permanently pressed.
Switching on the hob and cooking zones
1.Press the on/off button 
until the power setting displays indicate 0. The
2.Then press a cooking zone selection button (e.g.
for front left). The
3.Use the plus button 
or minus button 
to select a cooking level. The plus button will activate power setting 1 and the minus button power setting 9.
4.Put a metal cooking pot onto the cooking zone. The pan recognition device will activate the induction coil.
As long as no metal cooking pot is placed onto the cooking zone, the dis- play will alternate between the power level set and the symbol 
. If no pot is placed on the cooking zone it will switch off after 10 minutes for rea- sons of safety. Please refer to the section on “Pan recognition” .
Repeat items 2 to 4 in order to cook on other cooking zones at the same time.
Cooking pots and pans will not need to have magnetic properties in the case of radiant heating elements (proceed according to items 2 and 3).
Switching off a cooking zone
5.The
6.a) Press the minus button 
several times until the power setting display shows 0, or
b)press the minus button 
and the plus button 
once at the same time. The cooking zone is switched off direct irrespective of the power setting or
c)press the on/off button 
. The entire hob will be switched off (all of the cooking zones are switched off).
Switching off the hob
7.Press the on/off button 
. The hob will be completely switched off, irrespective of any settings.
23