Smeg SE2642ID2 manual Cookware for induction hobs, How to cut power consumption, Power settings

Page 6

Operation

Cookware for induction hobs

The cookware used for the induction cooking zone must be made of metal, have magnetic properties and a sufficient base area.

Only use pots with a base suitable for induction.

Suitable cookware

Unsuitable cookware

 

 

Enamelled steel pots with thick

Pots made of copper, stain-

base

less steel, aluminium, oven-

 

proof glass, wood, ceramic

Cast iron pots with an enamelled

and terracotta

base

 

 

 

Pots made of multi-layer stain-

 

less steel, stainless ferrite steel

 

and aluminium with special base

 

 

 

This is how to establish the suitability of a pot:

Conduct the magnet test described below or make sure that the pot bears the symbol for suitability for cooking with induction current.

Magnet test:

Move the magnet towards the base of your cookware. If it is attracted, you can use the cookware on the induction hob.

Note!

When using pans suitable for induction from some manufacturers, noises may occur which are attributable to the design of these pans.

Take care when using simmering pans for the simmering water may dry up unnoticed, resulting in damage to the pot and to the hob, in the event of which no liability will be assumed.

How to cut power consumption

The following are a few useful hints to help you cut your consumption of energy and use your new induction hob and the cookware efficiently.

The base of your cooking pots should be the same size as the cooking zone.

When buying cooking pots note that it is frequently the diameter of the top of the pot that it indicated. This is usually larger than the base of a pot.

Pressure cookers are particularly low on energy and time required thanks to the pressure and the fact that they are tightly closed. Short cooking times mean that vitamins are preserved.

Always make sure that there is sufficient fluid in your pressure cooker since the cooking zone and the cooker may be damaged as a result of overheating if the cooker boils dry.

Always close cooking pots with a suitable lid.

Use the right pot for the quantity of food you are cooking. A large pot which is hardly filled will use up a lot of energy.

22

Power settings

The heating power of the cooking zones can be set at various power levels. In the chart you will find examples of how to use each setting.

Cooking level

Suitable for

 

 

0

Off, using remaining heat

 

Keeping warm function (if available)

1-2

Simmering small quantities of food

 

(lowest setting)

3

Simmering

4-5

Simmering larger quantities, roasting

 

larger pieces of meat through.

6

Roasting, getting juices

7-8

Roasting

9

Bringing to the boil, browning, roasting

PPower setting (greatest output)

Residual heat display

The glass ceramic hob is equipped with a H residual heat display.

As long as the H lights up after the cooking zone has been switched off, the residual heat can be used for melting food or for keeping food warm.

The cooking zone may still be hot when the letter H no longer lights up. Risk of burns!

The ceramic hob is not directly heated in the case of an induction cooking zone; it only heats up due to the effect of heat reflected by the pan.

Image 6
Contents 225146 O91 Correct use Disposing of the packagingDisposing of old appliances For your informationFor the hob Safety instructionsConnection and operation For personsAppliance description Operating the hob with the touch keysOperation Cookware for induction hobs How to cut power consumptionPower settings Residual heat displaySwitching off the hob Switching on the hob and cooking zonesSwitching off a cooking zone Operating the buttonsChildproof lock Switching on the child-safety lockStop function Press the on/off buttonAutomatic switch-off timer Minute minder egg timerKeeping warm function if available Power settingAutomatic boost function 048Power management Power boost setting cooking zones marked with a PWeekly clean Cleaning and CareCleaning after use Specific soilingWhat to do if trouble occurs Installation Instructions for assemblySafety instructions for kitchen unit fitters VenilationClips BracketInstructions for assembly Technical data Electrical connectionStart of operation