Smeg SDCY66-1, SDCY66X1 Water supply connection, Connecting to the Water Supply, Drain Connection

Page 15

Installation instructions

2.1 Water supply connection

Preventing the risk of clogging or damage: if the water pipe is new or has not been used for a long time, before connecting to the water supply check that the water is clear and free of impurities, to prevent damage to the appliance. The dishwasher must always be connected to the water system with new hoses; old or used hoses must never be reused.

CONNECTING TO THE WATER SUPPLY

Connect the intake hose to a cold water supply with ¾” gas thread, inserting the filter A supplied with the dishwasher. Take care to screw the hose firmly into place with your hands and then complete by tightening about ¼ of a turn with pliers.

In dishwashers equipped with the ACQUASTOP device, the filters is already fitted inside the threaded ring.

The dishwasher can also be connected to a hot water supply not exceeding 60°C. Supplying the appliance with hot water cuts down the washing time by approximately 20 minutes, but slightly reduces its effectiveness. Make the connection to the domestic hot water supply using the same procedure described for connecting to the cold water supply.

DRAIN CONNECTION

Insert the dishwasher’s drain hose into a drain pipe having a diameter of at least 4 cm, or alternatively, place it inside the kitchen sink using the plastic support provided, taking care not to crush or excessively bend the hose. It is important to prevent the hose from coming loose and falling. For this purpose, the plastic support is equipped with a hole for tying it to the wall or water tap.

The free end should be positioned at a height of between 30 and 100 cm, and should never be submerged in water. If a horizontal drain extension hose is used (for a maximum of 3 m) the drain hose can be placed at a maximum height of 85 cm from the ground.



Image 15
Contents Guide for Using the Dishwasher and the Washing Programs Contents Front panel Description of the controlsConsumption Before starting a washing program make sure that Cancelling the Current ProgramWashing programs Table for Certification BodiesTo Save on ENERGY! … and Protect the Environment Changing the ProgramRemoving the Dishes END of CycleWater Hardness Table Adjusting the Water Softening SystemFor Cleaning Dishwashers Contents Safety and operating instructions Safety instructionsSafety instructions Aquastop Models For free-standing models only Installation and hook-upConnecting to the Water Supply Water supply connectionDrain Connection If the Appliance is Provided with a Plugless Supply Cord Electrical connection and precautionsFor Great Britain only When Cleaning and Maintaining the ApplianceOperating instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent Products Make Sure that the items being washed are dishwasher-safe General warnings and recommendationsUser instructions EN 50242 Standard Loads for Certification Bodies Using the basketsLoading the Lower Basket Lower BasketUpper Basket Cutlery BasketLoading the Upper Basket Pull-out version Adjusting the Upper BasketCleaning and maintenance Cleaning the Water Intake FilterCleaning the Spray Arms Fill the rinse aid dispenser Shut off the water supply tap Cleaning the Filter UnitIf water remains inside the dishwasher, check that If the dishes are not being cleaned properly, check thatReconnect the water intake hose and open the tap again If the program fails to start, check thatIf there are visible traces of rust inside the tank If the dishes fail to dry or remain dull, check that135 145

SDCY66-1, SDCY66X1 specifications

The Smeg SDCY66X1 and SDCY66-1 are stylish and efficient appliances designed to elevate any kitchen space. These built-in ovens combine cutting-edge technology with a sleek design, making them a perfect addition for culinary enthusiasts and modern households alike.

One of the standout features of the Smeg SDCY66X1 and SDCY66-1 is their multifunction oven capability. These models offer a variety of cooking modes, including traditional baking, grilling, and fan-assisted cooking, which allows users to explore different culinary techniques with ease. The fan-assisted feature ensures even distribution of heat, resulting in perfectly cooked meals every time.

Both models are equipped with a powerful and efficient heating system, enabling quick preheating times and consistent cooking results. With a generous capacity, they can accommodate large dishes or multiple trays simultaneously, making them ideal for family gatherings or dinner parties.

The Smeg SDCY66X1 and SDCY66-1 feature an intuitive touchscreen interface that simplifies navigation through cooking settings and options. This user-friendly design allows home chefs to easily adjust temperatures, timers, and cooking functions, ensuring a seamless cooking experience.

Safety is paramount with Smeg appliances, and these models come with several safety features, including a cooling fan that prevents overheating and a triple-glazed door that stays cool to the touch, reducing the risk of burns.

The sleek stainless steel finish of the SDCY66X1 and SDCY66-1 adds a modern touch to any kitchen decor, while its compact design allows for easy integration into existing cabinetry. Additionally, the easy-clean enamel interior simplifies maintenance, as spills and splatters can be easily wiped away.

Moreover, these ovens offer energy-efficient performance, helping to reduce energy consumption while delivering outstanding results. Users can enjoy gourmet cooking without compromising on energy efficiency, making it a smart choice for environmentally conscious consumers.

In conclusion, the Smeg SDCY66X1 and SDCY66-1 are not only aesthetically pleasing but also packed with high-performance features and advanced technologies. They are designed for those who appreciate the art of cooking and require an appliance that delivers both functionality and style in their everyday kitchen experiences.