Connecting the DVD/HDTV
Connect the video/audio cable as shown in the below figure and then, connect the power cord (See page A11).
•Connect the input terminal with a proper color match.
•Select the terminal that can be connected most easily among
Video
Monitor
Green | Blue | Red | White | Red |
Component Cable | (not included) |
|
| Audio Cable (not included) |
Green | Blue | Red | White | Red |
DVD
HDTV Receiver
Select an input signal.
Press the Input Select button on the remote controller to select the input signal. Or, press the SOURCE button at the front side of the monitor.
When connecting with a Component/audio cable.
•Select COMPONENT 1 / COMPONENT 2
DVI DIGITAL
DSUB ANALOG
VIDEO1(CVBS)
COMPONENT 1
COMPONENT 2
[Case 2]
A15
