LG Electronics L4200A Specifications

A40

ENGLISH

42 inches (106.68cm) Flat Panel Active matrix-TFT LCD

Anti-Glare coating

42inches viewable

0.681mm pixel pitch

Horizontal Freq. D-SUB : 30 - 83kHz (Automatic)

DVI-D : 30 - 72kHz (Automatic)

Vertical Freq. 56 - 85Hz (Automatic)

Input Form Separate TTL, Positive/Negative

Composite TTL, Positive/Negative

SOG (Sync On Green)

Digital

Signal Input 15 pin D-Sub Connector

DVI - D Connector (Digital)

Composite Video

S-Video

SCART 1/SCART 2 or COMPONENT 1/ COMPONENT 2

Input Form RGB Analog (0.7Vp-p/75ohm), Digital,

S-video, CVBS

Max D-SUB : 1600 x 1200 @60Hz

DVI-D : 1360 x 768 @60Hz – It may not be supported

depending on the OS or video card type.

Recommend 1360 x 768 @60Hz

DDC 2B

AC 100-240V~ 50/60Hz 2.8A

Normal :

300W

Stand-by/Suspend

≤5W

DPMS Off ≤5W

Power switch Off ≤5W

Power cut-off switch off

:

0W

Specifications

NOTE

Information in this document is subject to change without notice.

Display

Sync Input

Video Input

Resolution

Plug&Play

Power Input

Power

Consumption

RMS Audio Output 10W+10W(R+L)

Input Sensitivity 0.7Vrms

Speaker Impedance 8Ω

Audio

* Applicable only for models that support the speakers

Contents

Main L4200A Color Monitor Page Installation and Connection Input Selection and Tracking Miscellaneous Table of Contents Please read these safety precautions carefully before using the monitor. If you ignore the caution message, you may be slightly injured or the product may be damaged Precautions in installing the Monitor Caution Safety Precautions Warning Electrical Power Related Precautions Precautions in Moving the Monitor Safety Precautions Precautions in Using the Monitor On Disposal Accessories [Case 2] AV Option Board Optional [Case 1] Using the Remote Control Name of the Remote Controller Buttons * 1. 2. Using the Remote Control Inserting batteries into remote controller. 3. PIP POP PBP Page Rear View Name and Function of the Parts Page Connecting the Monitor Turn on the PC. Connecting the VCR/DVD C When connecting with a SCART cable. C Monitor VCR/DVD Connecting the DVD/HDTV Connecting AV Outputs Page Name of the Buttons in the Screen Adjustment Unit AUTO/SELECT Button Main Power Switch SOURCE Button OSD Lock/Unlock Button Menu button + OSD Menu When Connected to Your PC OSD Menu When Watching Video/DVD/HDTV How to adjust the OSD (On Screen Display) screen How to adjust the screen automatically Adjusting Screen CLOCK/PHASE and Position Adjusting Screen Color OSD Menu When Connected to Your PC Adjusting the audio function Selecting the Options To adjust the PIP(PICTURE IN PICTURE) of the screen To adjust the POP(PICTURE OUT PICTURE) of the screen To adjust the PBP(PICTURE BY PICTURE) of the screen OSD Menu When Watching VCR/DVD/HDTV Adjusting Screen Image Adjusting the audio function Selecting the Options To adjust the PIP(PICTURE IN PICTURE) of the screen To adjust the POP(PICTURE OUT PICTURE) of the screen To adjust the PBP(PICTURE BY PICTURE) of the screen Controlling the Multiple Monitors Connecting the cable Communication Parameter Commands Related with User Control Auto Assign Address You can control several monitors at a time by connecting them to a single PC. Controlling the Multiple Monitors Miscellaneous Commands Page 'Unknown Monitor' message appears when the monitor is connected. No image is displayed 'CONTROLS LOCKED' message appears. Troubleshooting The screen image looks abnormal. After-image appears on the monitor. Troubleshooting Screen color is abnormal. The audio function does not work. The screen size function in the OSD menu does not work. Specifications Display Sync Input Audio Video Input Resolution Plug&Play Power Input Power Consumption Specifications Dimensions &Weight Environmental Conditions Preset mode PC Mode Preset Mode Preset mode Power LED