ELECTRICAL CONNECTION
•Remove the cover from the Field Wiring Compartment with a phillips screwdriver.
•Feed the Power Supply Cable through the electrical knockout. Connect the Power Supply Cable to the range- hood cable. At- tach the Power Supply Cable grounding lead to the green screw provided. Attach the White lead of the power supply to the White lead of the rangehood with a
•Replace the cover.
Green Ground screw
Ground wire
Power supply cable
Chimney assembly
Upper exhaust chimney |
|
• Slightly widen the two sides of the upper flue and hook them |
|
behind the brackets 7.2.1, making sure that they are well |
|
seated. |
|
• Secure the sides to the brackets using the 4 screws 12c sup- | 2.1 |
plied. | 2 |
7.2.1
12c
Lower exhaust chimney
8b
2.2
8a
• Slightly widen the two sides of the flue and hook them be- tween the upper flue and the wall, making sure that they are well seated.
• Fix the lower part laterally to the hood body using the 2 screws 12c supplied.
•On the recirculation version, fit the directional grids 8a – 8b in their housings making sure that the directional symbols are to- wards the top and front of the hood. Also make sure that they are correctly inserted in the connection extension pieces 14.1.
12c
EN |
| 1 |
| 10 |