Smeg PGFA95F-1 manual Front

Page 7

Overall dimensions: location of gas and electrical connection points (all measures in mm).

FRONT

Caution: surface temperature underneath may exceed 125 degrees C.

To avoid a hazard, under-bench access must be restricted. Refer to installation instruction

IMPORTANT: when installing the appliance above a cupboard, a dividing shelf, as shown above, must be installed.

If installed above an under-bench oven, this is not required.

Image 7

Contents Contents Instructions for Safe and Proper USE IntroductionIntroduction Installation of the Appliance Instructions for the installerFixing the conventional built-in model to the structure Instructions for the installer Fixing the flush-top model to the structure Front Requirements Clearance above and around domestic appliancesRoom ventilation Discharge of combustion products GAS ConnectionPlate for any reason Electrical connectionAdaptation to Different Types of GAS Replacement of nozzles on the hobArrangement of burners on cooking hob Burner and nozzle characteristics tableFinal Operations Adjustment of minimum for natural gasLubrication of gas taps USE of the Cooking HOB Instructions for the userLighting the burners Diameter of containers Practical advice for using the burnersCleaning stainless steel Cleaning and MaintenanceCleaning of cooking hob components Preventive maintenance Problems and Causes