POWER SWITCH-ON
To switch on the dishwasher, simply turn the ON/OFF selector (1) until the letter I appears on the INDICATOR DISC (2).
TABLE FOR CERTIFICATION BODIES |
|
|
|
|
|
Reference standard | EN 50242 | |
|
|
|
Reference program |
| (*) Selector on P6 |
|
|
|
Load |
| 12 |
|
|
|
Type of detergent |
| B |
|
|
|
Amount of detergent |
| 30 g |
|
|
|
Rinse aid setting |
| Depending on the model 3/4 or 4/6 |
EN 50242 STANDARD LOADS
STARTING THE DISHWASHER
After correctly carrying out all the preceding operations, to start the dishwasher simply press the START/STOP (5) button for a few seconds, until the start cycle acoustic device sounds. The INFORMATION DISPLAY (4) will show the duration of the program in minutes. The duration time is only approximate, because it depends on the washing conditions (quantity of dishes, water temperature, etc.), and is also continually updated as the washing program progresses.
The INFORMATION DISPLAY (4) shows the estimated duration of the washing program; if it exceeds 60 minutes, the hours and minutes are displayed in alternation.
If it is necessary to open dishwasher door during the washing cycle, there will be a
This operation may negatively affective the progress of the washing cycle.
END OF CYCLE
The end of the washing cycle is signalled by a brief sounding of an acoustic device and by the blinking of the selected program on the INFORMATION DISPLAY (4).
Before setting a new washing program, the door must first be opened, then reclosed, or the START/STOP (5) button pressed to “reset” the display and stop the flashing.
LOWER BASKET | UPPER BASKET WITH | UPPER BASKET WITH |
| METAL CUP RACK | PLASTIC CUP RACK |
Depending on models, the cutlery basket may have removable grilles in which the cutlery can be inserted to keep the items far enough apart and allow optimal water passage.