E1
E2
E3
E4
E5
E6
E7
User instructions
6. Troubleshooting
The dishwasher is capable of signalling a number of faults through the simultaneous illumination of several indicator lights, with the following meanings:
FAULT | DESCRIPTION |
|
|
| Acquastop failure |
| The |
| system is tripped in case of water leaks. Contact |
| the |
Safety level
The system which limits the water level inside the dishwasher has been tripped. Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the
Water heating malfunction
The water is not heated or the heating parameters are not correct. Repeat the washing program; if the problem persists, contact the
Water temperature monitoring malfunction Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the
Water intake malfunction
The appliance does not take in water or does not do so correctly. Check that the water connections are correct, the water intake tap is turned on and the filter is not fouled. If the problem persists, contact the
Water pump-out malfunction
The appliance does not pump out the water or does not do so correctly. Check that the drain hose is not kinked or crushed and that the siphon and filter are not fouled. If the problem persists, contact the
Turbine flow-regulator malfunction
The appliance is not able to "measure" the amount of water loaded accurately. Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing cycle. If the problem persists, contact the
33