Smeg DF614BE, DF614FAS7 instruction manual Technical Data

Page 33

User instructions

E8

E9

FAULT

DESCRIPTION

 

 

 

Alternate washing system malfunction

 

Interrupt the program and switch off the

 

dishwasher. Switch the dishwasher back on,

 

program it again and start the washing cycle. If

 

the problem persists, contact the after-sales

 

service.

Water intake system malfunction

Contact the after-sales service.

Light off

Light on

Light flashing

If an alarm occurs the appliance interrupts the program in progress and signals a fault.

Alarms E1, E2, E3, E4, E8 and E9 interrupt the current program immediately.

The E5, E6 alarms interrupts the running program once the cause is resolved, it will bring bach the execution of the program.

The alarm E7 is visualized at the end of the cycle that comes, however, brought to the end since the operation of the dishwasher is not harmed.

To “reset” an alarm is necessary:

Open and close the door, or turn off and on the machine. At this point is possible to program the dishwasher again.

If the malfunction persists, contact your authorised Service Centre.

TECHNICAL DATA

Width

Depth measured flush with the outer edge of the control panel

Height

597 599 mm

Free standing: 600 mm

Semi-integrated: 570 mm

Free standing from 850 mm to 870 mm Semi-integrated from 820 mm to 870 mm

Capacity

 

14 Standard place settings

 

 

 

Water supply pressure

 

min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar)

 

 

 

Electrical characteristics

 

See rating plate

34

Image 33
Contents Dishwasher Contents Safety and operating instructions Safety instructionsSafety instructions Aquastop Models Installation and hook-up Installation instructionsConnecting to the Water Supply Water supply connectionDrain Connection Electrical connection and precautions Front panel Description of the controls180 Setting the Washing ProgramTable for Certification Bodies Washing programsProgramming Switching onProgram Selection Starting the ProgramInterruption a Program Changing a ProgramAnnulling a Program Removing the Dishes To Save on ENERGY! … and Protect the EnvironmentOperating instructions Using the water softening systemAdjusting the Water Softening System Water Hardness Table Using the rinse aid and detergent dispensersAdding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent User instructions General warnings and recommendations User instructions Using the baskets EN 50242 Standard Loads for Certification BodiesLower Basket Loading the Lower Basket Cutlery Basket Loading the Upper Basket Upper BasketAdjusting the Upper Basket Cleaning and maintenance Cleaning the Water Intake FilterCleaning the Spray Arms Prolonged Disuse Cleaning the Filter UnitBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that Fault Description TroubleshootingTechnical Data 135 145