Smeg DI612A1 User instructions, Description of the controls, Upper panel, On/Off Button

Page 10

User instructions

3. Description of the controls

3.1 Upper panel

All the dishwasher controls are grouped on the upper panel. Switch-on, programming, switch-off etc. procedures are only possible when the door is open.

ON/OFF BUTTON

Pressing this button energises the appliance.

SELECTED PROGRAM INDICATOR LIGHTS

2Illumination of this light denotes the program selected and the occurrence of a fault (troubleshooting).

PROGRAM SELECTION BUTTON

3By pressing this button in sequence it is possible to select the desired program.

SALT WARNING LIGHT

Illumination of this light signals that salt container is empty.

RINSE AID WARNING LIGHT

Illumination of this light signals that rinse aid dispenser is empty.

QUICK TIME OPTION BUTTON

This button can be pressed to reduce the duration of programs.

QUICK TIME OPTION LIGHT

Illuminates to indicate that the function is activated.

Image 10

Contents GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents USES OTHER THAN THOSE DESCRIBED ABOVE Safety instructions1. Safety and operating instructions NEVER BE REMOVEDTHIS DISHWASHER MUST BE USED BY ADULTS AQUASTOP MODELS APPLIANCE2. Installation and hook-up Installation instructionsFor free-standing models only 2.1 Water supply connection CONNECTING TO THE WATER SUPPLYDRAIN CONNECTION NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD 2.2 Electrical connection and precautionsIF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD Fuse replacement FOR GREAT BRITAIN ONLYSELECTED PROGRAM INDICATOR LIGHTS User instructions3. Description of the controls 3.1 Upper panel“3/1” OPTION LIGHT 13 INFORMATION DISPLAY SETTING THE WASHING PROGRAM AND SWITCHING ON“3/1” OPTION BUTTON HALF LOAD BUTTONOnly run the soak program with half loads Very dirty pans The correct amount of detergent has been added to the dispenser 3.2 Washing programsBefore starting a washing program make sure that QUICK TIME available in all programs except the soak programCHANGING THE PROGRAM CANCELLING THE CURRENT PROGRAMDELAYED START available in all programs except the soak program TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENTEND OF CYCLE TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENTREMOVING THE DISHES 4. Operating instructions 4.1 Using the water softening systemADJUSTING THE WATER SOFTENING SYSTEM 4.2 Using the rinse aid and detergent dispensers WATER HARDNESS TABLEADJUSTING THE RINSE AID DISPENSER SETTING ADDING THE RINSE AIDADDING THE DETERGENT During the washing cycle, the dispenser will be opened automaticallyUser instructions Correct loading of the dishes helps ensure optimal washing results 4.3 General warnings and recommendationsMAKE SURE that the items being washed are dishwasher-safe Items which are not dishwasher-safe Dishes and objects in copper, tin, zinc or brass these tend to stainLOWER BASKET 4.4 Using the basketsLOADING THE LOWER BASKET CUTLERY BASKET UPPER BASKETLOADING THE UPPER BASKET Loading examples Models with cutlery racksADJUSTING THE UPPER BASKET Version BUser instructions CLEANING THE SPRAY ARMS 5. Cleaning and maintenanceCLEANING THE WATER INTAKE FILTER 5.1 General warnings and recommendationsPROLONGED DISUSE CLEANING THE FILTER UNITGENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE Fill the rinse aid dispenser Shut off the water supply tapBEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE TROUBLESHOOTING MINOR PROBLEMSIf the dishes are not being cleaned properly, check that Reconnect the water intake hose and open the tap againIf the dishes show signs of streaking, staining, etc., check that If the dishes fail to dry or remain dull, check thatIf there are visible traces of rust inside the tank Safety level 6. TroubleshootingFAULT E1 E2 E3 E4 E5 E6Alternate washing system malfunction E7 E8 E9Turbine flow-regulator malfunction Water intake system malfunctionElectrical characteristics TECHNICAL DATAWidth Depth Height depending on models Capacity Water supply pressure