Smeg DI612A1 instruction manual User instructions, Using the rinse aid and detergent dispensers

Page 19
WATER HARDNESS TABLE

User instructions

WATER HARDNESS TABLE

 

 

WATER HARDNESS

 

 

 

 

 

 

 

 

 

 

SETTING

 

German Degrees (°dH)

 

French Degrees (°dF)

 

 

 

 

 

 

 

 

 

 

 

 

0

- 4

0

- 7

 

Setting N. 1 NO SALT

 

 

 

 

 

 

5 - 15

8 - 25

 

Setting N. 1

 

 

 

 

 

 

 

16

- 23

26

- 40

 

Setting N. 2

 

 

 

 

 

 

 

24

- 31

41

- 60

 

Setting N. 3

 

 

 

 

 

 

 

32

- 47

61

- 80

 

Setting N. 4

 

 

 

 

 

 

 

48

- 58

81 - 100

 

Setting N. 5

Contact your local water board for information on the hardness of your water supply.

4.2 Using the rinse aid and detergent dispensers

The detergent and rinse aid dispensers are situated on the inner part of the door: the detergent dispenser is on the left, and the rinse aid dispenser is on the right.

With the exception of the SOAK program, before every washing cycle it is necessary to add the required amount of detergent to the detergent dispenser. The rinse aid, on the other hand, should only be added as required.

18

Image 19
Contents GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents NEVER BE REMOVED Safety instructions1. Safety and operating instructions USES OTHER THAN THOSE DESCRIBED ABOVETHIS DISHWASHER MUST BE USED BY ADULTS APPLIANCE AQUASTOP MODELS2. Installation and hook-up Installation instructionsFor free-standing models only 2.1 Water supply connection CONNECTING TO THE WATER SUPPLYDRAIN CONNECTION NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD 2.2 Electrical connection and precautionsIF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD FOR GREAT BRITAIN ONLY Fuse replacement3.1 Upper panel User instructions3. Description of the controls SELECTED PROGRAM INDICATOR LIGHTSHALF LOAD BUTTON 13 INFORMATION DISPLAY SETTING THE WASHING PROGRAM AND SWITCHING ON“3/1” OPTION BUTTON “3/1” OPTION LIGHTOnly run the soak program with half loads Very dirty pans QUICK TIME available in all programs except the soak program 3.2 Washing programsBefore starting a washing program make sure that The correct amount of detergent has been added to the dispenserTO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT CANCELLING THE CURRENT PROGRAMDELAYED START available in all programs except the soak program CHANGING THE PROGRAMEND OF CYCLE TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENTREMOVING THE DISHES 4.1 Using the water softening system 4. Operating instructionsADJUSTING THE WATER SOFTENING SYSTEM WATER HARDNESS TABLE 4.2 Using the rinse aid and detergent dispensersADDING THE RINSE AID ADJUSTING THE RINSE AID DISPENSER SETTINGDuring the washing cycle, the dispenser will be opened automatically ADDING THE DETERGENTUser instructions Correct loading of the dishes helps ensure optimal washing results 4.3 General warnings and recommendationsMAKE SURE that the items being washed are dishwasher-safe Dishes and objects in copper, tin, zinc or brass these tend to stain Items which are not dishwasher-safeLOWER BASKET 4.4 Using the basketsLOADING THE LOWER BASKET UPPER BASKET CUTLERY BASKETLoading examples Models with cutlery racks LOADING THE UPPER BASKETVersion B ADJUSTING THE UPPER BASKETUser instructions 5.1 General warnings and recommendations 5. Cleaning and maintenanceCLEANING THE WATER INTAKE FILTER CLEANING THE SPRAY ARMSFill the rinse aid dispenser Shut off the water supply tap CLEANING THE FILTER UNITGENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE PROLONGED DISUSEReconnect the water intake hose and open the tap again TROUBLESHOOTING MINOR PROBLEMSIf the dishes are not being cleaned properly, check that BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSEIf the dishes show signs of streaking, staining, etc., check that If the dishes fail to dry or remain dull, check thatIf there are visible traces of rust inside the tank E1 E2 E3 E4 E5 E6 6. TroubleshootingFAULT Safety levelWater intake system malfunction E7 E8 E9Turbine flow-regulator malfunction Alternate washing system malfunctionElectrical characteristics TECHNICAL DATAWidth Depth Height depending on models Capacity Water supply pressure