Instructions for the installer
4.4 Arrangement of the burners on the cooking hob
BURNERS
1. Auxiliary
2.
4.
BURNERS
1. Auxiliary
2.
3. Rapid
4.
4.5 Adjustment of oven burner
To adjust the oven burner you need to open the oven door and carry out the following operations:
•Remove the oven basin and its rack.
•Lift up the oven surface and pull it outwards.
4.5.1 Replacing the oven and grill burner nozzles
•Loosen the oven burner fixing screw A.
•Push burner B towards the right until the nozzle is accessible.
•Using a 13 socket wrench, replace the nozzle, inserting a new nozzle suitable for the type of gas to be used (see paragraphs “4.2 Burner and nozzle characteristics table (60 cm model)” and “4.3 Burner and nozzle characteristics table (90 cm model)“).
4.5.2 Primary air adjustment for the oven and grill burners
• Loosen adjustment screw “A” of the air regulation sleeve.
•Turn adjustment sleeve “B” to the position that corresponds to the
type of gas to be used according to the table below.
• Tighten the adjustment screw and restore the seals.
• When the operation is completed, reassemble the burner correctly.
OVEN |
| NATURAL GAS | G 30/31 (LPG) | |
X= | 5 mm | 10 mm | ||
| ||||
|
|
|
| |
GRILL |
| NATURAL GAS | G 30/31 (LPG) | |
X= | 5 mm | 15 mm |
13