Whynter FX-7SB/W Using the HOT Water TAP, Specifications, Cleaning and Caring for the Dispenser

cooling LED indicator turns on and the cooling system starts. When the cold water reaches a temperature of approx. 8ºC / 46ºF, the green light goes off and the cooling system stops working. The machine turns to keeping cool mode. When the cold water temperature rises to 10ºC / 50ºF degree, the cooling system will automatically resumes.

6.Allow 40 minutes for water to reach the set hot and cold temperatures.

Contact a local water bottle distributor to purchase water bottles.

USING THE HOT WATER TAP

IMPORTANT : The hot water tap has a safety feature to prevent children from accessing hot water.

To dispense hot water:

∙Slide the safety switch on top of the hot water button up

∙Continue holding the safety switch up while pushing the hot water dispenser button. Hot water is dispensed as long as you keep the hot water dispenser button pressed. Release the button when you are finished dispensing hot water

∙When you release the hot water dispenser button make sure the safety switch returns to its original position.

SPECIFICATIONS

Capacity:	3 or 5 Gallon Water Bottle
Chilling Rate:	Approx. 2 liters per hour
Heating Rate:	Approx. 5 liters per hour

Power Consumption:

Cooling - 80W

Heating - 500W

CLEANING AND CARING FOR THE DISPENSER

IMPORTANT: Maker sure both power switches are turned draining

Cleaning the Dispenser Cabinet

The dispenser cabinet can be washed with mild soap and water. Rinse thoroughly with clear water.

Cleaning the Condenser

Sweep away or vacuum up dust from the condenser coils on the back of the unit. For best results, use a brush specially designed for this purpose.

Cleaning the Drip Tray and Grille

The dispenser drip tray is not self-draining. To reduce water spotting, the tray and its grille should be emptied, cleaned and wiped dry regularly.

OFF and UNPLUG the water dispenser before cleaning and

Cleaning the Water Tanks

The water dispenser tanks need to be cleaned periodically to prevent buildup of mineral deposits that can affect water taste and flow. To clean the water tanks:

1Remove the water bottle from the bottle supporter. Watch out for water spillage.

2Drain the water tanks ( see Draining the Dispenser, page 7)

3Create a solution of one quart of water with either one quart of vinegar or four ounces of lemon juice. Make enough so you can fill the water tank all the way to the top.

4Pour the solution in the opening at the top of the dispenser.

6