5After about one hour, press the hot & cold buttons until no more water comes out of the taps.
IMPORTANT: Before use, dispense at least one quart of water from each tap to make sure the cleaning solution is completely removed.
Draining the Dispenser
IMPORTANT: Put both power switches to the OFF position and UNPLUG the water dispenser before draining. Allow the dispenser to cool overnight before draining to reduce the risk of scalding
The dispenser should be drained before cleaning the tanks or if it will not be used for extended periods.
1.Remove the water bottle from the dispenser.
2.Place a bucket beneath the drain plug. The drain plug is located at the rear of the dispenser (see
image below).
7.Remove the cap from the drain plug and allow water to drain completely. Replace the cap.
8.Press both dispenser buttons until no more water comes out of the taps.
7