Sub-Zero UC-24CI4 manual Undercounter Installation Unpack the Unit, Anti-Tip Bracket

Undercounter Installation 7

subzero.com/specs

Unpack the Unit

Before moving the undercounter unit into position, make sure all opening dimensions, electrical and plumbing requirements are complete and accurate.

IMPORTANT NOTE: The floor under the undercounter unit must be at the same level as the surrounding finished floor to allow for removal of the unit for servicing.

Use an appliance dolly to move the undercounter unit near the installation opening. Position the dolly at the side of the unit to prevent damage to finished surfaces. Remove and discard all packing materials and tape.

IMPORTANT NOTE: Do not discard the kickplate, anti-tip bracket, hardware and the shipping bolts that hold the wood to the bottom of the unit (leveling legs). These items will be needed for the installation.

For models UC-24BG and UC-24C(I), the roller-assembly wine shelves should be removed to reduce weight and prevent them from rolling. To remove, pull the shelf out to its full extension, gently and evenly lift up on both sides of the front of the shelf and remove. Reverse the procedure to reinstall the shelf.

Anti-Tip Bracket

To prevent the unit from tipping forward and provide a stable installation, the unit must be secured in place with the anti-tip bracket.

An anti-tip bracket and hardware is provided with the undercounter unit. Placement of the anti-tip bracket is critical to a stable installation. The anti-tip bracket must be installed securely.

The anti-tip bracket should be attached to the wall behind the unit with the bracket flange located immediately above the top of the unit. Refer to the illustration below.

For installations that cannot accommodate the anti-tip bracket, the optional countertop bracket (provided) can be used to secure the undercounter unit. This bracket will secure the front of the unit to the underside of the coun- tertop, above the unit. Refer to the illustration below. If it is not possible to use the countertop bracket, wedge shims along the sides and top of the unit to secure.

Before moving the undercounter unit into position, protect any finished flooring with appropriate materials and secure the door closed.

ANTI-TIP

BRACKET

1/4" (6)

COUNTERTOP

BRACKET

Anti-tip bracket. Countertop bracket.