Ice Machine Installation | 11 |
Reverse Door Swing
5)Remove the ice machine top cover by removing the two screws along the back of the unit. Refer to the illustration below.
6)Remove four screws from the front top rail. Refer to the illustration below.
7)Pivot the top rail end for end to expose the two left- hand top hinge screw holes and reinstall.
subzero.com/specs
8)Remove two screws from the lower edge of the bottom trim plate and slide the trim plate to the right, to cover the
9)Reinstall the door by mounting hinges using the left- hinge mounting holes. Reinstall the shim removed in step 1, between the cabinet and bottom hinge. Check operation of the door by opening it.
TOP COVER |
SCREWS |
TOP RAIL |
SCREWS |
TRIM PLATE |
SCREWS |
Remove top cover. | Remove front top rail. |