Tandberg Data FS-1600, FS-1610 Setting Up, Requirements, Ambient Temperature, Height and Weight

Page 13

_____________________________________________________________

2. Setting Up

2.1.Requirements

When planning a site to house the Viking FS-1600 Series NAS appliance, you may want to consider requirements for power and network availability, as well as a space with well regulated temperature and humidity that is relatively free of dust and other airborne contaminants. If your installation calls for placement on a table top, apply the supplied rubber feet to the bottom of the chassis.

Before unpacking and installing the FS-1600 Series NAS appliance, select a suitable installation site for maximum efficiency. Consider the following factors when choosing a site:

Near a grounded power outlet

Clean and dust-free

Sturdy surface free from vibration

Well-ventilated and away from sources of heat

Protected from electromagnetic fields produced by electrical devices such as air conditioners and radio and TV transmitters.

Take note of the following information when planning where and how to install the FS-1600 Series NAS appliance.

Warnings

Do not attempt to modify or use the supplied AC power cord if it is not the exact type required. A product with more than one power supply will have a separate AC power cord for each supply.

The power button on the NAS does not turn off AC power. To remove the AC power from the NAS, you must unplug the AC power cord from the wall outlet or power supply. The power cord is considered the disconnect device to the main (AC) power. The socket outlet that the NAS plugs into should be installed near the equipment and should be easily accessible.

2.1.1.Ambient Temperature

The maximum operating temperature of the FS-1600 Series NAS appliance is 95°F (35°C) and the relative humidity of the NAS is in the range 8% to 90% (non-condensing). Careful consideration should be given to installing the NAS in an environment compatible with 95°F (35°C) maximum ambient temperature.

2.1.2.Height and Weight

Before installing the FS-1600 Series NAS appliance, make sure that the surface on which you are setting it is strong enough to bear its weight and accommodate its size.

Dimensions (including front bezel): 17.2 (W) × 5.2 (H) × 25.5 (D) inches or (437 × 132 × 648 mm)

Weight (approximately, depending on configuration): 72 lbs. (32.7 kg)

2-1

Tandberg Viking FS-1600 Series NAS Hardware User Manual

Image 13
Contents Tandberg Viking FS-1600 NAS Appliance Related publications available from Tandberg Data Asia Title Table of Contents Troubleshooting Overview Package ContentsRAID Features of Viking FS-1600 Series NAS ApplianceTandberg DataOverview Front Panel Power Supply Unit Failure LED Front Panel LED IndicatorsRear Panel Power supply connectorFan Storage Rear Panel LED Indicators LANDVD-ROM Drive Hard Disk Drives Ambient Temperature Setting UpHeight and Weight RequirementsBattery Precaution Power SourceRack Mounting Circuit OverloadingSufficient Ventilation Accessing the HDD Tray & Installing Hard DrivesHard Drive Tray Use a Hard, Stable Surface when installing Rack Installation Content of Accessory Kit Inner Rack Rails Rack Mount InstallationOuter Rail Bracket Locking Tabs Connecting Cables Turning on the Viking FS-1600 Series NAS Appliance TroubleshootingTandberg DataSetting Up Turning OFF the Viking FS-1600 Series NAS Appliance Using Microsoft WindowsHardware RAID Layout RAID ConfigurationHDD System Volume SV RAID Volume CalculationData Volume DV Page Preventing Static Electricity Discharge Customizing the Viking FS Series NAS ApplianceExpanding Connectivity Upgrading Storage Capacity Removing/Installing Hot-Swap Hard DriveBuilt-in Networking USB ConnectionPage Page System Management Windows InstallerTandberg DataSystem Management RAID Management Configure and Creation of RAID VolumesChanging RAID Level and Capacity Size System RecoverySelect Yes Local Disk From Image Tandberg DataSystem Management Tandberg DataSystem Management Tandberg DataSystem Management Tandberg DataSystem Management Page Before Calling Tandberg Data Technical Support TroubleshootingTroubleshooting Steps Safety GuidelinesTandberg DataTroubleshooting Page Glossary Dhcp Dynamic Host Configuration ProtocolBase-T Base-TXHub Event ViewerIP address LAN Local Area NetworkNetwork card MountNetwork system NFS Network File SystemRack mount RAID 0+1Router Volume set ServiceWindows Administrative tools ServerTandberg DataGlossary Tandberg DataGlossary This Page Intentionally Left Blank Vii

FS-1600, FS-1610 specifications

Tandberg Data has long been recognized as a leader in data storage solutions, and their FS-1610 and FS-1600 tape libraries exemplify this reputation. These products provide a reliable and efficient means of data backup and archiving, essential in today's data-driven environments.

The FS-1610 and FS-1600 are designed to meet the needs of businesses of various sizes, from small to large enterprises. Both models feature scalability, allowing organizations to expand their storage capacities as data requirements grow. The FS-1610 offers a robust 10TB raw capacity, while the FS-1600 delivers a substantial 3TB storage capacity, accommodating diverse data volumes effectively.

One of the standout characteristics of these tape libraries is their integration of LTO (Linear Tape-Open) technology. This open standard for magnetic tape data storage ensures compatibility across various platforms and systems. The FS-1610 and FS-1600 support multiple generations of LTO tapes, allowing users to leverage existing assets while preparing for future upgrades and ensuring long-term investment protection.

Both models are engineered for efficient data retrieval and management, featuring high-speed data transfer rates that enhance overall performance. The FS-1610, for instance, boasts speeds of up to 400MB/s, enabling quick backups and restoring processes. This efficiency is crucial for organizations looking to minimize downtime and ensure business continuity.

User-friendly design plays an essential role in the FS-1610 and FS-1600’s functionality. With intuitive interfaces and straightforward management software, administrators can easily monitor and control their backup processes. This accessibility simplifies complex tasks, making it easier for IT teams to maintain optimal data protection.

Furthermore, these tape libraries come with enhanced data protection features, including built-in encryption and data integrity checks. Such capabilities safeguard sensitive information against unauthorized access and ensure that data remains intact and recoverable over time.

In conclusion, Tandberg Data's FS-1610 and FS-1600 tape libraries combine advanced technology, large storage capacities, and user-friendly design to provide robust data protection solutions. Their integration of LTO technology, high-speed performance, and scalable nature makes them invaluable assets for businesses aiming to safeguard their critical data efficiently and reliably.