True Manufacturing Company THDC-6, TDC-47 installation manual Safety Precautions

Page 3

True Food Service Equipment, Inc.

SAFETY INFORMATION

How to Maintain Your Unit to Receive the Most Efficient and Successful Operation

You have selected one of the finest commercial freezer units made. It is manufactured under strict quality controls with only the best quality materials available. Your TRUE freezer, when properly maintained, will give you many years of trouble-free service.

WARNING!

Use this appliance for its intended purpose as described in this Owner Manual.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

This freezer must be properly installed and located in accordance with the Installation Instructions before it is used.

Do not allow children to climb, stand or hang on the shelves in the freezer. They could damage the freezer and seriously injure themselves.

Do not touch the cold surfaces in the refrigerated compartment when hands are damp or wet. Skin may stick to these extremely cold surfaces.

Do not store or use flammable liquids or vapors in the vicinity of this or any other appliance.

Keep fingers out of the “pinch point” areas; clearances between the doors and cabinet are necessarily small; be careful closing doors when children are in the area.

NOTE: Any servicing, warranty repairs or maintenance should be carried out by qualified personnel, failure to do so could be dangerous and may invalidate your warranty.

Unplug the freezer before cleaning and making repairs.

Setting temperature controls to 0 position does not isolate the unit from the electrical supply, you must disconnect the main power lead from the wall receptacle to isolate.

1

www.truemfg.com

1

Image 3
Contents True Dipping Cabinets Horizontal Dipping Cabinets Page Safety Precautions Risk of Child Entrapment HOW to Safely Dispose of Used Freezer EquipmentUSE of Extension Cords HOW to Connect ElectricityLocating Installation / Operation Instructions OwnershipRequired Tools UncratingNSF Approved Sealants Sealing Cabinet to FloorVentilation Cabinet DrainInstallation of Optional Legs and Castors Removing KickplateUnit Leveling With Castors Optional Dipwell for TDC Models Installing DipwellDrill Hole Centered on Startup Electrical InstructionsStorage Shelving Installation / Operation for TDC Models onlyStorage / Loading Product for TDC Models only ShelvingTemperature Control Temperature Control Adjustment For High AltitudeManual Defrost Step Cleaning the Condenser CoilMagnetic ICE Breaker only on TDC Models Maintenance CleaningStainless Steel Equipment Care and Cleaning Light Bulb Replacement Light Bulb Replacement for TDC ModelsWarranty Information U.S.A. & Canada only