AEG 86378-KG operating instructions Refrigerator/freezer needs ventilation, Appliance Alignment

Page 11

Installation

The refrigerator/freezer needs ventilation

Air is fed under the door through the vent slots in the base and is exhausted upwards along the back wall. To ensure proper air circulation never cover or alter the vent openings.

Important! If the appliance is installed under a hanging cabinet, a clearance of at least 10 cm between the top of the appliance and the cabinet above it must be maintained.

Please check whether, after installing your appliance and especially after reversing the door, the door seal seals tightly. A badly fitting door seal may lead to heavy frosting and a higher power consumption (see also "What to do if ...“).

0 1. Remove the two wall spacers from the appliance accessories pack and, in accordance with the illustrations, fix them at the top of the rear of the appliance so that the distance from the wall required for the necessary ventilation is ensured.

Appliance Alignment

The appliance must stand on a firm horizontal surface. 0 1. Please level out unevennesses in the

floor by screwing the two adjustable front feet in or out using the 13 mm spanner supplied. To do this remove the plinth panel (see chapter “Transporting the appliance“)

818 36 55-00/3

11

Image 11
Contents Santo 86378-KG Dear customer Contents Contents Refrigerant Important Safety InstructionsPrior to Installation InstallationServicing Child SafetyMaintenance and Cleaning During UseOld Appliances Environmental InformationAppliance Transport PackagingBefore Use Important Ensure door handle is correctly positioned Fitting the Door HandlesRemove the transport fittings from the storage shelves Screw the top door bracket to the door handle 1. MountInstallation Location InstallationAppliance Alignment Refrigerator/freezer needs ventilationTerminals in your plug, proceed Wire coloured green Yellow must be connected toElectrical Connection Inserting and changing the active carbon filter Reversing The DoorCarbon filter View of Appliance Appliance DescriptionCold Accumulation Block Freezer trayControl panel Temperature setting buttonsThese buttons are connected to the temperature display Reset button Temperature DisplaysNo words appear in the display Mode buttonText display Remove the cold accumulation block from the appliance Prior to Initial Start-UpInitial Start-Up Temperature AdjustmentTip Shopping Operating modesFrostmatic and Coolmatic CoolmaticHoliday Switching the Appliance OffSwitching off freezer section when fridge switched off To switch the fridge section on again, press + or buttonSwitching off freezer section when fridge switched on To switch the freezer section on again, press + or buttonOpen door warning Power cut warningControl and Information Systems For the freezer section Temperature warningFor the fridge section Opening the Freezer Compartment Door Function ErrorsLongfresh 0 C cold zone Interior AccessoriesStorage Shelves Variable Inner DoorDismantling of the Bottle- and Can Holder Setting the air moistureQuick Chill Shelf Bottle- and Can HolderChilling of food Quick chillBottle Holder Chilling of cans or bottlesCorrect storage Moist storage Guidelines for storage timesSome foods in the Longfresh 0 C cold zone Dry storage Fruit Storage period TipsFreezing Tips Frozen StorageDefrosting Storage Goods Symbols/Freezing CalendarPreparation of Ice Cubes Freezer Compartment Defrosting Internal Cleaning Maintenance and CleaningAfter everything is dry place appliance back into service External CleaningReplacing the light bulb Food Storage Energy Saving AdviceHints and Tips Normal Operating SoundsWhat to do if Symptom SolutionRefrigerant circuit has been checked for leaks Regulations, Standards, GuidelinesCompressor Technical TerminologyRefrigerant Circuit EvaporatorStandard Guarantee Conditions Guarantee ConditionsCalls may be recorded for training purposes Service & Spare Parts08705 929 Customer CareSubject to change without notice