AEG S75578KG3 manual Prior to Initial Start-Up, Temperature Adjustment

Page 16

Prior to Initial Start–Up

1 Before connecting the appliance to the mains and putting it into operation for the first time, leave the appliance to stand for 30 minutes if was transported upright. After transport on its side, the appliance must be left to stand for 2 hours before putting it into operation. This is necessary to allow the refrigerant to flow back into the compressor. Otherwise the compressor may be damaged.

01. Please clean the appliance interior and all accessories prior to initial start-up (see section: “Maintenance and Cleaning”).

2.The appliance must be correctly installed in accordance with the chap- ter "Installation" before it is put into operation for the first time. Care should be especially taken that the mains voltage and frequency avail- able correspond with the appliance’s rating plate.

Initial Start-Up

01. Insert plug into mains socket.

2.Press ON/OFF button.

The compressor starts and then runs automatically.

3.Set temperature to +5 °C or colder (see section: "Temperature Adjust- ment").

3 Goods to be refrigerated can be loaded immediately after switching on, because the storage temperature in the refrigerator is quickly reached.

Temperature Adjustment

With the buttons for temperature adjustment the desired temperatures in the refrigerator can be adjusted.

01. Press either the „+“ (WARMER) or „-“ (COLDER) button.

The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display.

2.To adjust to a warmer temperature, press the „+“ (WARMER) button. To adjust to a colder temperature, press the „-“ (COLDER) button. The changed setting is immediately displayed on the temperature display.

Each time the button is pressed the temperature is adjusted by 1 °C. Adjustable temperature range: +2 °C to +8 °C, +15 °C (Holiday mode)

16

818 35 69-02/2

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Santo 72358 KA3 Dear customer Contents Contents Important Safety Instructions Prior to InstallationInstallation RefrigerantEnvironmental Information Appliance Transport Old applianceBefore Use PackagingInstallation Location InstallationAppliance Alignment Installation of the carbon filter Refrigerator needs VentilationElectrical Connection Description of the Appliance View of the applianceButtons for Adjusting the Temperature Control PanelTemperature Display Coolmatic buttonAlarm OFF button Quick chillChilling of cans/bottles Chilling of foodPrior to Initial Start-Up Temperature AdjustmentInitial Start-Up Switching the Appliance off Holiday Mode Opening the DoorTemperature warning Function ErrorsControl and Information Systems Open Door WarningInterior Fittings Storage ShelvesVariable Inner Door Salad BinBottle Rack Quick Chill ShelfDismantling of the Bottle and Can Holder Bottle and Can HolderBottle Holder Proper Storage Energy Saving Advice Hints and TipsNormal Operating Sounds Food StorageMaintenance and Cleaning Internal CleaningExternal Cleaning DefrostingChanging the carbon filter Replacing the Light BulbSymptom Solution What to do ifSounding Regulations, Standards, Guidelines Technical TerminologyGuarantee Conditions Standard Guarantee Conditions08705 929 Service & Spare PartsCustomer Care ÏïïKÉäÉÅíêçäìñKÅçã= Arctis 75248 GA3 818 35 95-02/7 818 35 95-02/7 What to do if Maximum Load Hints and TipsImportant Safety Instructions Important Safety Instructions Environmental Information Before Use Freezer needs ventilation Blue No-frost frost free system Cold accumulation block Temperature setting buttons These buttons are connected to the temperature displayFROSTMATIC-button Initial use Remove the cold accumulation block from the applianceTemperature Adjustment Switching the Appliance Off Red warning indicator will go out when the door is closed Temperature memory Freezing Preparation of Ice Cubes Frozen StorageTips Storage Goods Symbols/Freezing Calendar Maximum LoadHints and Tips Maintenance and Cleaning Correcting Malfunctions Malfunction Possible cause RemedyWhat to do if Replace defective light bulb Place the cover again Technical Terminology Standard Guarantee Conditions 818 35 95-02/7 Service & Spare Parts ÏïïKÉäÉÅíêçäìñKÅçã=
Top Page Image Contents