AEG S75578KG3 manual Before Use

Page 40

Before Use

Packaging

01. Remove all adhesive tape and packaging from the interior of the appli- ance.

3 Any remnants of adhesive can be removed with white spirit.

2.Remove the transport protection pieces and pull off the adhesive tape.

3.Wash the inside of the appliance with lukewarm water with a little bicarbonate of soda added (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry the appliance thoroughly.

Installation

The position of the freezer part and the fridge part in the combination fridge-freezer can be decided by the customer. However the final assembly of the appliance or a later change in the position of the freezer and fridge must be carried out by your local Service Force Centre.

Installation Location

The appliance should be installed in a well ventilated, dry room.

Energy use and efficient performance of the appliance is affected by the ambient temperature.

The appliance should therefore

–not be exposed to direct sunlight;

–not be installed next to radiators, cookers or other sources of heat;

–only be installed at a location whose ambient temperature corresponds to the climate classification, for which the appliance is designed.

8	818 35 95-02/7

Image 40

Contents Santo 72358 KA3 Dear customer Contents Contents Important Safety Instructions Prior to InstallationInstallation RefrigerantEnvironmental Information Appliance Transport Old applianceBefore Use PackagingInstallation Location InstallationAppliance Alignment Installation of the carbon filter Refrigerator needs VentilationElectrical Connection Description of the Appliance View of the applianceButtons for Adjusting the Temperature Control PanelTemperature Display Coolmatic buttonAlarm OFF button Quick chillChilling of cans/bottles Chilling of foodPrior to Initial Start-Up Temperature AdjustmentInitial Start-Up Switching the Appliance off Holiday Mode Opening the DoorTemperature warning Function ErrorsControl and Information Systems Open Door WarningInterior Fittings Storage ShelvesVariable Inner Door Salad BinBottle Rack Quick Chill ShelfDismantling of the Bottle and Can Holder Bottle and Can HolderBottle Holder Proper Storage Energy Saving Advice Hints and TipsNormal Operating Sounds Food StorageMaintenance and Cleaning Internal CleaningExternal Cleaning DefrostingChanging the carbon filter Replacing the Light BulbSymptom Solution What to do ifSounding Regulations, Standards, Guidelines Technical TerminologyGuarantee Conditions Standard Guarantee Conditions08705 929 Service & Spare PartsCustomer Care ÏïïKÉäÉÅíêçäìñKÅçã= Arctis 75248 GA3 818 35 95-02/7 818 35 95-02/7 What to do if Maximum Load Hints and TipsImportant Safety Instructions Important Safety Instructions Environmental Information Before Use Freezer needs ventilation Blue No-frost frost free system Cold accumulation block Temperature setting buttons These buttons are connected to the temperature displayFROSTMATIC-button Initial use Remove the cold accumulation block from the applianceTemperature Adjustment Switching the Appliance Off Red warning indicator will go out when the door is closed Temperature memory Freezing Preparation of Ice Cubes Frozen StorageTips Storage Goods Symbols/Freezing Calendar Maximum LoadHints and Tips Maintenance and Cleaning Correcting Malfunctions Malfunction Possible cause RemedyWhat to do if Replace defective light bulb Place the cover again Technical Terminology Standard Guarantee Conditions 818 35 95-02/7 Service & Spare Parts ÏïïKÉäÉÅíêçäìñKÅçã=