AEG S75578KG3 Temperature setting buttons, These buttons are connected to the temperature display

Page 45

Description of the appliance

Control Panel

1ON/OFF button

2Temperature setting button (for warmer temperatures)

3Temperature display

4Temperature setting button (for colder temperatures)

5FROSTMATIC indicator light (yellow)

6FROSTMATIC button

7WARNING indicator light (red)

8ALARM OFF button (see "Control and Information Systems")

Temperature setting buttons

The temperature is adjusted using the „+“ (WARMER) and „-“ (COLDER) buttons.

These buttons are connected to the temperature display.

The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the dis- play of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons, „+“ (WARMER) or „-“ (COLDER).

Each time one of the two buttons is pressed again the DESIRED tem- perature is adjusted by 1 °C.

If neither button is pressed, the temperature display automatically switches back after a short period (approx. 5 sec.) to the display of the ACTUAL temperature. The ACTUAL temperature in the appliance is now adjusted to match the preset DESIRED temperature.

DESIRED temperature means:

The temperature that is required in the appliance, this can be adjusted to the temperatures shown in the display. The DESIRED temperature is indicated by flashing numbers.

ACTUAL temperature means:

The temperature display indicates the temperature that is currently present in the appliance. The ACTUAL temperature is indicated with illuminated numbers.

3 Once the FROSTMATIC function has been switched on the DESIRED temperature that was set originally cannot be changed.

818 35 95-02/7

13

Image 45
Contents Santo 72358 KA3 Dear customer Contents Contents Prior to Installation Important Safety InstructionsInstallation RefrigerantEnvironmental Information Old appliance Appliance TransportPackaging Before UseInstallation Installation LocationAppliance Alignment Refrigerator needs Ventilation Installation of the carbon filterElectrical Connection View of the appliance Description of the ApplianceControl Panel Buttons for Adjusting the TemperatureCoolmatic button Temperature DisplayQuick chill Alarm OFF buttonChilling of cans/bottles Chilling of foodTemperature Adjustment Prior to Initial Start-UpInitial Start-Up Switching the Appliance off Opening the Door Holiday ModeFunction Errors Temperature warningControl and Information Systems Open Door WarningStorage Shelves Interior FittingsVariable Inner Door Salad BinQuick Chill Shelf Bottle RackBottle and Can Holder Dismantling of the Bottle and Can HolderBottle Holder Proper Storage Hints and Tips Energy Saving AdviceNormal Operating Sounds Food StorageInternal Cleaning Maintenance and CleaningExternal Cleaning DefrostingReplacing the Light Bulb Changing the carbon filterWhat to do if Symptom SolutionSounding Technical Terminology Regulations, Standards, GuidelinesStandard Guarantee Conditions Guarantee ConditionsService & Spare Parts 08705 929Customer Care ÏïïKÉäÉÅíêçäìñKÅçã= Arctis 75248 GA3 818 35 95-02/7 818 35 95-02/7 Maximum Load Hints and Tips What to do ifImportant Safety Instructions Important Safety Instructions Environmental Information Before Use Freezer needs ventilation Blue No-frost frost free system Cold accumulation block These buttons are connected to the temperature display Temperature setting buttonsFROSTMATIC-button Remove the cold accumulation block from the appliance Initial useTemperature Adjustment Switching the Appliance Off Red warning indicator will go out when the door is closed Temperature memory Freezing Frozen Storage Preparation of Ice CubesTips Maximum Load Storage Goods Symbols/Freezing CalendarHints and Tips Maintenance and Cleaning Malfunction Possible cause Remedy Correcting MalfunctionsWhat to do if Replace defective light bulb Place the cover again Technical Terminology Standard Guarantee Conditions 818 35 95-02/7 Service & Spare Parts ÏïïKÉäÉÅíêçäìñKÅçã=