AEG S75578KG3 manual Before Use, Packaging

Page 8

Before Use

Packaging

01. Remove all adhesive tape and packaging from the interior of the appli- ance.

3 Any remnants of adhesive can be removed with white spirit.

2.Remove the transport protection pieces and pull off the adhesive tape.

3.Wash the inside of the appliance with lukewarm water with a little bicarbonate of soda added (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry the appliance thoroughly.

Remove the transport fittings from the storage shelves:

4. Slide the fittings securing the shelf forward to the thicker section on the edge of the storage shelf.

5. Slide the storage shelf far enough forward so that it can be hinged downwards and the fittings can be removed from the guides.

8	818 35 69-02/2

Image 8

Contents Santo 72358 KA3 Dear customer Contents Contents Important Safety Instructions Prior to InstallationInstallation RefrigerantEnvironmental Information Appliance Transport Old applianceBefore Use PackagingAppliance Alignment InstallationInstallation Location Installation of the carbon filter Refrigerator needs VentilationElectrical Connection Description of the Appliance View of the applianceButtons for Adjusting the Temperature Control PanelTemperature Display Coolmatic buttonAlarm OFF button Quick chillChilling of cans/bottles Chilling of foodInitial Start-Up Temperature AdjustmentPrior to Initial Start-Up Switching the Appliance off Holiday Mode Opening the DoorTemperature warning Function ErrorsControl and Information Systems Open Door WarningInterior Fittings Storage ShelvesVariable Inner Door Salad BinBottle Rack Quick Chill ShelfBottle Holder Bottle and Can HolderDismantling of the Bottle and Can Holder Proper Storage Energy Saving Advice Hints and TipsNormal Operating Sounds Food StorageMaintenance and Cleaning Internal CleaningExternal Cleaning DefrostingChanging the carbon filter Replacing the Light BulbSymptom Solution What to do ifSounding Regulations, Standards, Guidelines Technical TerminologyGuarantee Conditions Standard Guarantee ConditionsCustomer Care Service & Spare Parts08705 929 ÏïïKÉäÉÅíêçäìñKÅçã= Arctis 75248 GA3 818 35 95-02/7 818 35 95-02/7 What to do if Maximum Load Hints and TipsImportant Safety Instructions Important Safety Instructions Environmental Information Before Use Freezer needs ventilation Blue No-frost frost free system Cold accumulation block Temperature setting buttons These buttons are connected to the temperature displayFROSTMATIC-button Initial use Remove the cold accumulation block from the applianceTemperature Adjustment Switching the Appliance Off Red warning indicator will go out when the door is closed Temperature memory Freezing Tips Frozen StoragePreparation of Ice Cubes Storage Goods Symbols/Freezing Calendar Maximum LoadHints and Tips Maintenance and Cleaning Correcting Malfunctions Malfunction Possible cause RemedyWhat to do if Replace defective light bulb Place the cover again Technical Terminology Standard Guarantee Conditions 818 35 95-02/7 Service & Spare Parts ÏïïKÉäÉÅíêçäìñKÅçã=