AEG 2642-6 KG manual Control panel, Temperature adjustment with ambient temperature below +16¡C

in your plug, proceed as follows:

1.The wire coloured green and yellow must be connected to the termi- nal marked with the letter ãEÒ or by the earth symbol or coloured green and yellow.

2.The wire coloured blue must be connected to the terminal ãNÒ or coloured black.

3.The wire coloured brown must be connected to the terminal marked ãLÒ or coloured red.

4.Upon completion there must be not cut, or stray strands of wire pre- sent and the cord clamp must be secure over the outer sheat.

Warning! A cut-off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut-off plug is disposed of safely.

Control panel

4 0 1

32

1 2 3 4

The thermostat knob (4) is the on/off switch.

The green pilot lamp (3), which comes on when the panel is swit- ched on and the mains voltage is available. In this switch position, the refrigerating unit automatically operates by system control.

Temperature adjustment with ambient temperature below +16¡C

When the ambient temperature in the room in which the appliance is situated is less than 16¡ C, the ambient switch (2) must be depressed. The yellow pilot light (1) comes on. In this way, when the ambient temperature is low, the compressor operates for longer periods to ensure that the storage temperature of -18¡ C is maintained inside the freezer compartment.

Important!

If the ambient temperature rises to above +16¡C, de-activate the ambient switch in order to avoid unnecessary energy consumption. The yellow pilot light goes out.

30