EVGA 122-CK-NF68-XX Adjust GPU Settings nTune, ‰ Clock Drive Strength, ‰ Command Per Clock

Installing and Configuring the EVGA nForce 680i SLI Motherboard

‰Clock Drive Strength

This value is filled in by the system and can not be changed by the user.

‰Command Per Clock

The Command Per Clock (tCPC) sets the Command Rate for the memory controller. The value shown cannot be changed

‰Async Latency

This value is filled in by the system and can not be changed by the user.

Adjust GPU Settings

Use this interface to adjust the graphics processing unit (GPU) on your video card(s). You can override the shipped clock frequencies of your GPU and GPU memory and set the GPU fan speed. Increasing the clock speeds increases your GPU performance and may require adjusting cooling to maintain the same level of reliability.

When this option is checked, all temperatures are shown in Celsius. When this option is not check, temperatures are shown in Fahrenheit.

Figure 20. Adjust GPU Settings (nTune)

77