Janome 385.80802 owner manual Adjusting the buttonhole width and density, Double layer buttonhole

-Adjusting the buttonhole width and density

(1) Adjusting the buttonhole width

Press the mode selection key _ to enter the stitch width adjusting model

Press the Down(-) key to decrease buttonhole width. Press the Up (+) key to increase buttonhole width. The buttonhole width can be varied from 2.5 to 7.0. Narrow buttonhole (2.5 mm wide)

Wide buttonhole (7.0 mm wide)

(2)Adjusting the buttonhole stitch density

Press the mode selection key _ to enter the stitch length adjusting mode.

Press the Down (-) key for denser stitch.

Press the Up (+) key for coarser stitch.

The stitch density can be varied from 0.2 to 0.8.

The LED display does not show the sewing step when the adjusting mode is selected. After the buttonhole sewing is finished, LED will show _--_.

Double layer buttonhole

To make a solid and sturdy buttonhole, sew another layer of buttonhole over the previous one.

After the buttonhole is finished, simply depress the foot control again.

(1)Do not raise the foot or reselect the pattern. The machine will sew another buttonhole in the following order and stop automatically:

(2)Straight stitching in reverse to go back to the starting point.

(3)Front bartack and left row

(4)Right row

(5)Back barrack an d locking Stitches at the end

f

(1)

Q®

(2)

f

(1)

(2)

(3)

(4)

(5)

5O