![](/images/new-backgrounds/1055901/5590151x1.webp)
Dropping the Feed Dog
The feed dog can be lowered by the drop feed lever for sewing on buttons, manual embroidery etc.
Push the drop feed lever to the right to lower the feed dog.
Push the lever to the left to raise the feed dog, it will return to the up position when starting the machine.
NOTE:
The feed dog should be in up position for normal sewing. Turn the handwheel toward you to check if the feed dog comes up after setting the lever in the up position.
0Down position (_ Up position (_) Feed dog
(_ Handwheel
Changing the Presser Foot
WARNING:
Turn OFF the power'switchbefore changing the foot
Always use the proper foot for the selected pattern. Wrong foot can cause needle to break.
To release:
Raise the needle and presser foot.
Press the red button on the back of the foot holder and the foot will drop off.
O Red button
•To snap on:
Place the presser foot so the pin on the foot lies just under the groove of the foot holder.
Lower the foot holder tO lock the foot in place.
(&) Groove _) Pin
Detaching and Attaching the Foot Holder
WARNING:
Turn OFF the power switch before detaching or
attachingthe foot holder.
To detach:
Raise the presser bar and turn the setscrew counterclockwise to remove it.
Remove the foot holder. (_ Setscrew
(_D Foot holder
o To attach:
Align the hole in the foot holder with the threaded hole on the presser bar and insert the setscrew through the hole. Tighten the setscrew by turning it clockwise.
• 14