Cleaning | Hook | Race | and Feed Dog | r | _, |
WARNING; |
|
|
|
|
|
Raise thepresser foot and needle, and then unplug |
|
| |||
the machine. |
|
|
|
| |
DO NOT dismantle the machine other than as |
|
| |||
explained | in this | section. |
|
|
|
[] Remove | the needle and | presser foot. |
| [] | |
0Screwdriver (_ Setscrew (_) Needle plate
[] Remove the setscrew and needle plate.
[] Take out the bobbin and bobbin holder.
[] Clean the bobbin holder with the lint brush and soft | [] | |
dry | cloth. |
|
(_ | Bobbin holder |
|
[] Brush out dust and lint from the feed dog and clean the hook race with the lint brush.
[] Wipe inside of the hook race with a dry cloth.
NOTE: | I |
You may use vacuum cleaner. |
|
[] Replacing Bobbin Holder and Needle Plate
[] Insert the bobbin holder.
Make sure to fit the knob next to the stopper in the hook race.
_) Guide pins (_) Knob
(_ Stopper
[] Insert the bobbin and attach the needle plate aligning the holes with the guide pins.
(_ Holes
[] Tighten the setscrew firmly. (_ Setscrew
NOTE:
After cleaning the machine, attach the needle and presser foot.
[]
[]
78
