Installing and Configuring the EVGA nForce 680i SLI Motherboard

1394 Cable

Provides an additional 1394 ports to either the back panel of the chassis.

USB 2.0 4-Port Cable

Provides four additional USB ports to either the front or back panels of the chassis.

SATA Signal Cable (Qty Six)

Used to support the Serial ATA protocol and each one connects a single drive to the motherboard

Comm2 Bracket Cable

IDE-ATA 133 HDD Cable

SLI Connector

Used to connect two graphic cards installed in the x16

PCI Express slots in an SLI configuration.

Chipset Fan

This fan is recommended for use if overclocking or using liquid/passive cooling solution.

EVGA nForce 680i SLI

Motherboard

The EVGA nForce 680i SLI motherboard with the 680i SPP and MCP processors is a PCI Express, SLI-ready motherboard. Figure 1 shows the motherboard and Figures 2 shows the back panel connectors.

10

Page 61
Image 61
EVGA 122-CK-NF68-XX manual Evga nForce 680i SLI Motherboard, Sata Signal Cable Qty Six