EVGA 122-CK-NF68-XX manual Init Display First, Reset Configuration Data, Resources Controlled By

Installing and Configuring the EVGA nForce 680i SLI Motherboard

Init Display First

This function on the PnP/PCI Configuration menu allows you to define if the initial display is in the PCI slot or in the PCI Express slot. Options are [PCI Slot] and [PCIEx].

Reset Configuration Data

This function on the PnP/PCI Configuration menu allows you to enable or disable the resetting of Extended System Configuration Data (ESCD) when you exit Setup. Set this to [Enabled] if you have installed a new add-on and the system reconfiguration has caused a serious conflict that prevents the OS from booting. The default setting is [Disabled].

Resources Controlled By

This function on the PnP/PCI Configuration menu allows you to define if the BIOS can automatically configure all the boot and plug-and-play compatible devices or if you can manually select IRQ, DMA, and memory base address fields. Select [Auto(ESCD)] if you want the BIOS to automatically populate these fields. If you select [Manual] so you can assign the resources, IRQ Resources is enabled for input.

Resources		Controlled By		[			]
					Auto(ESCD)
x IRQ	Resources			Press Enter
Resources		Controlled By		[		)]
					Manual
IRQ	Resources		[Press Enter]

62