EVGA 122-CK-NF68-XX manual Use the following procedure to configure Teaming

Introduction

Use the following procedure to configure Teaming:

31.Select Start¾All Programs¾NVIDIA Corporation¾NVIDIA Control Panel

to display the NVIDIA Control Panel.

32.Click on the networking icon to display the Networking Control Panel Categories.

33.Select Adjust Teaming configuration to display the teaming configuration window. Note that by default, Teaming is disabled.

34.Select Combine my network adapters (recommended) radio button to

enable Teaming.

35. Click Apply to enable teaming.

‰Installing Graphics Cards in an SLI Configuration on page 67.

‰Power Supply

The power supply requirement is dependent upon the power and the

xlvii