Hardware Installation

4.Ensure that the fan assembly is aligned with the chassis vents according to the fan assembly instruction.

5.Secure the motherboard with a minimum of eight-to-ten screws.

Connecting Cables and

Setting Switches

This section takes you through all the connections and switch settings necessary on the motherboard. This will include:

‰Power Connections

¾24-pin ATX power (PWR1)

¾8-pin ATX 12V power (PWR2)

¾Auxiliary power for graphics (PWR3)

‰Internal Headers

¾Front panel

¾IEEE 1394a

¾USB Headers

¾Audio

¾Speaker

¾COM

‰FDD

‰IDE

‰Serial ATA II

‰Chassis Fans

‰Rear panel USB 2.0 Adapter

‰Expansion slots

‰CMOS jumper settings

See Figure 1 on page 11 to locate the connectors and jumpers referenced in the following procedure.

17

Page 68
Image 68
EVGA 122-CK-NF68-XX manual Connecting Cables Setting Switches, ¾ COM ‰ FDD ‰ IDE