
Installing and Configuring the EVGA nForce 680i SLI Motherboard
System Monitor
Use this menu to monitor the
The following items on the CMOS Setup Utility main menu are commands rather than submenus:
Load Defaults
Use this command to load the NVIDIA LinkBoost technology settings for
Set Password
Use this command to set, change, and disable the password used to access the BIOS menu.
Save & Exit Setup
Use this command to save settings to CMOS and exit setup.
Exit Without Saving
Use this command to abandon all setting changes and exit setup.
The following two items on the CMOS Setup Utility main menu are status indicators:
NVIDIA LinkBoost (Status indication at bottom of screen)
This status indicator is displayed at the bottom of the BIOS screen and consists of the following remarks:
¾Detected: System detects
¾Not Detected: The LinkBoost components are not detected.
SLI-Ready Memory (Status indication at bottom of screen)
This status indicator is displayed at the bottom of the BIOS screen and consists of the following remarks:
¾Enabled:
¾Disabled:
¾Not Detected:
32