EVGA 122-CK-NF68-XX MAC Config, IEEE1394 controller, HD Audio, IDE HDD Block Mode, ‰ MACx LAN

Installing and Configuring the EVGA nForce 680i SLI Motherboard

MAC Config

Press Enter to display the MAC Config menu.

MAC0	LAN	[Enabled]
MAC1	LAN	[Disabled]

‰MACx LAN

Use these functions to set the MAC0 and/or MAC1 LANs to Auto or disable their functions.

IEEE1394 controller

This function on the Integrated Peripherals menu allows you to enable or disable the IEEE1394 (Firewire) interface.

HD Audio

This function on the Integrated Peripherals menu allows you to enable or disable the hard disk audio function.

IDE HDD Block Mode

Using this function on the Integrated Peripherals menu allows your IDE hard drive needs to support block mode. Select [Enabled] to automatically detect the optimal number of block read/writes per sector the drive can support.

Select [Disabled] if your drive does not support block mode.

Onboard FDC Controller

This function on the Integrated Peripherals menu allows you to enable or disable the onboard FDC controller function.

Onboard Serial Port 1

This function on the Integrated Peripherals menu allows you to select the onboard serial port 1 function. Options are [3F8/IRQ4], [2E8/IRQ3], [3E8/IRQ4], [Auto], and [Disabled].

58