Cornelius CH1500-CH7500 manual Installation, Location

Page 5

INSTALLATION

LOCATION

Install the Chiller indoors in a well ventilated area where ambient temperatures will never fall below 40_F or rise above 110_F. To obtain optimum cooling capacity, the ambient temperature should be 80_F or below.

Standard CH Chiller have air-cooled condensers. On air-cooled units it is important that the air intake and dis- charge are not obstructed. Avoid hot air discharge from other equipment or enclosed areas where heat build-up could cause a significant rise in ambient temperatures. A minimum of two feet of space on all four sides of the Chiller will be sufficient to prevent obstruction. Water-cooled units should be located near a water source and drain.

TANK FILL, 1–INCH FPT

CH1500, 2000, 3000

ELECTRICAL JUNCTION BOX

CONTROL PANEL

(SEE DETAIL)

TANK FILL 1–INCH FPT

S.S. (CH5000, 7500)

TANK DRAIN

 

AIR OUTLET

 

 

(AIR INLET ON

 

 

OPPOSITE END)

WATER OUTLET

TANK LEVEL GAUGE

 

 

3/4–INCH OR 1–INCH

CH 5000 AND 7500

 

FPT S.S.

ON REAR FOR

 

WATER INLET

CH1500, 2000 AND 3000

 

 

 

3/4–INCH OR 1–INCH

 

 

FPT S.S.

FIGURE 1. INSTALLATION DETAILS

91961OPR

2

Image 5
Contents Chiller Table of Contents Table of Contents cont’d Introduction Specification NotesGeneral Information Location InstallationPhase Protection / 3-Phase Option Adjustment Phase Protection / 3-Phase OptionElectrical PlumbingChiller without Reservoir Chiller with ReservoirAuto Refill Option Chiller Plumbing Schematic with Pump and Tank Standard This page Left Blank Intentionally Water Flow START-UP Thermostat AdjustmentStart UP Control Panel Dual Point AdjustmentCooling Start-Up 91961OPR Maintenance Commercial/Automotive Antifreeze Fluid RecommendationLab & Industrial Grade Ethylene Glycol Power Light OFF TroubleshootingHigh Pressure Alarm Sample Data Plate for CH5002-A ServiceThis page Left Blank Intentionally LOW Temperature Control LTC Safety ControlsHigh Pressure Control HPC LOW Pressure Control LPCRefrigeration Piping Schematic with HOT GAS Bypass Index Description Parts ListPump and Tank Components Electrical BOX Components Warranty Page IMI Cornelius INC

CH1500-CH7500 specifications

The Cornelius CH1500-CH7500 series of beverage dispensers is an innovation in the world of commercial beverage service, combining high performance with user-friendly features. These dispensers are designed for establishments ranging from coffee shops to restaurants, ensuring a consistent and delightful beverage experience for customers.

One of the standout features of the CH1500-CH7500 series is its impressive capacity. With options available that can serve up to 7500 ounces, these dispensers can accommodate high-demand environments, allowing for efficient service during peak hours. This ample capacity minimizes the need for frequent refills, thereby enhancing operational efficiency.

The series is equipped with advanced technology that ensures optimal beverage quality. The integrated refrigeration system maintains precise temperature control, preserving the integrity and flavor of dispensed beverages. Whether serving iced coffee, flavored syrups, or other chilled drinks, the temperature consistency is a significant advantage in maintaining product quality.

User experience is at the forefront of the CH1500-CH7500 design. The interface features an intuitive, easy-to-use control panel that allows operators to select different beverage options with minimal effort. This design consideration aids in speeding up service times and reducing errors, ensuring customers receive their orders accurately and promptly.

Another important characteristic of the Cornelius series is its customizable options. Businesses can tailor their dispensers with various configurations to meet specific beverage types and combinations, allowing for a personalized approach to beverage service. This flexibility can be particularly beneficial for establishments looking to stand out in a competitive market.

Durability is also a significant factor in the construction of the CH1500-CH7500 series. Made from high-quality materials, these dispensers are built to withstand the rigors of daily use in busy commercial environments. This reliability reduces downtime and maintenance costs, allowing businesses to maximize productivity.

In terms of energy efficiency, the series stands out with its eco-friendly features that help to minimize energy consumption without compromising performance. This not only supports sustainability efforts but also contributes to cost savings in operational expenses.

Overall, the Cornelius CH1500-CH7500 series is an excellent choice for businesses prioritizing efficiency, quality, and user experience in their beverage dispensing needs. With its combination of advanced technology, customizable features, and durability, it is poised to meet the demands of a wide range of commercial settings.