Cornelius CH1500-CH7500 manual Dual Point Adjustment, Cooling Start-Up, Control Panel

Page 11

Dual Point Adjustment

1.To set the “SET POINT” for Level 1. Press and release the “SET” button, Re1 should be displayed.

2.Press the “SET” button, the current SET POINT TEMPERATURE should be displayed. Press the UP or DOWN button to change the SET POINT.

3.To set the “SET POINT” for Level 2. Press and release the “SET” button, Re2 should be displayed.

4.Press the “SET” button, the current SET POINT TEMPERATURE should be displayed. Press the UP or DOWN button to change the SET POINT.

5.Press the fnc button to exit the program.

The thermostat has a range that has been preset at the factory. The range is 40_F (5_C) to 100_F (38_C). If operation outside of this range is required, please contact the Technical Service Department.

Cooling Start-Up

Once flow is established and the thermostat is set to the desired set-point, turn the control power switch to “ON”. Ensure that the air is flowing in the left side (facing the control panel) and out the right side. If not, reverse two of the three incoming power supply leads at the terminal strip. Once again, check for correct air flow. All alarm indicators should be extinguished and the Chiller refrigeration system will cycle in order to maintain the established set-point.

Re-check the reservoir level to ensure that it is ”FULL” (if so equipped) and add water if necessary.

The Chiller is now ready for normal operation.

2 & 3

4

5

6

7

8 & 9

CONTROL

COOLING

HIGH

LOW

LOW

PUMP

POWER

 

PRESSURE

PRESSURE

TEMP.

POWER

Control Panel

1.TEMPERATURE INDICATOR/CONTROLLER (Thermostat)- Combines a precise temperature control and accurate set ability with a convenient LED temperature readout that indicates system liquid temperature.

2.CONTROL POWER SWITCH- A simple (ON/OFF) switch that switches power to the control circuit. This switch must be “ON” for the Chiller to operate.

91961OPR

8

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Chiller Table of Contents Table of Contents cont’d Introduction Specification NotesGeneral Information Location InstallationPlumbing Phase Protection / 3-Phase OptionPhase Protection / 3-Phase Option Adjustment ElectricalChiller without Reservoir Chiller with ReservoirAuto Refill Option Chiller Plumbing Schematic with Pump and Tank Standard This page Left Blank Intentionally Water Flow START-UP Thermostat AdjustmentStart UP Control Panel Dual Point AdjustmentCooling Start-Up 91961OPR Maintenance Commercial/Automotive Antifreeze Fluid RecommendationLab & Industrial Grade Ethylene Glycol Power Light OFF TroubleshootingHigh Pressure Alarm Sample Data Plate for CH5002-A ServiceThis page Left Blank Intentionally LOW Pressure Control LPC Safety ControlsLOW Temperature Control LTC High Pressure Control HPCRefrigeration Piping Schematic with HOT GAS Bypass Index Description Parts ListPump and Tank Components Electrical BOX Components Warranty Page IMI Cornelius INC

CH1500-CH7500 specifications

The Cornelius CH1500-CH7500 series of beverage dispensers is an innovation in the world of commercial beverage service, combining high performance with user-friendly features. These dispensers are designed for establishments ranging from coffee shops to restaurants, ensuring a consistent and delightful beverage experience for customers.

One of the standout features of the CH1500-CH7500 series is its impressive capacity. With options available that can serve up to 7500 ounces, these dispensers can accommodate high-demand environments, allowing for efficient service during peak hours. This ample capacity minimizes the need for frequent refills, thereby enhancing operational efficiency.

The series is equipped with advanced technology that ensures optimal beverage quality. The integrated refrigeration system maintains precise temperature control, preserving the integrity and flavor of dispensed beverages. Whether serving iced coffee, flavored syrups, or other chilled drinks, the temperature consistency is a significant advantage in maintaining product quality.

User experience is at the forefront of the CH1500-CH7500 design. The interface features an intuitive, easy-to-use control panel that allows operators to select different beverage options with minimal effort. This design consideration aids in speeding up service times and reducing errors, ensuring customers receive their orders accurately and promptly.

Another important characteristic of the Cornelius series is its customizable options. Businesses can tailor their dispensers with various configurations to meet specific beverage types and combinations, allowing for a personalized approach to beverage service. This flexibility can be particularly beneficial for establishments looking to stand out in a competitive market.

Durability is also a significant factor in the construction of the CH1500-CH7500 series. Made from high-quality materials, these dispensers are built to withstand the rigors of daily use in busy commercial environments. This reliability reduces downtime and maintenance costs, allowing businesses to maximize productivity.

In terms of energy efficiency, the series stands out with its eco-friendly features that help to minimize energy consumption without compromising performance. This not only supports sustainability efforts but also contributes to cost savings in operational expenses.

Overall, the Cornelius CH1500-CH7500 series is an excellent choice for businesses prioritizing efficiency, quality, and user experience in their beverage dispensing needs. With its combination of advanced technology, customizable features, and durability, it is poised to meet the demands of a wide range of commercial settings.
Top Page Image Contents