Electronic Oven Control, Display, Cancel

ELECTRONIC OVEN CONTROL

ABC D

J	I	H	G	F		E
A. Bake		E. Cancel		H. Delay (on standard-clean models)
B. Clock/timer display		F. Keep warm		I. Cook & hold
C. More (+)/less (-) buttons		G. Clock		J. Broil
D. Timer
A		B		C	D

K	J	I	H	G	F	E
A. Bake		E. Cancel				I. Clean (on some models)
B. Clock/timer display		F. Keep warm				J. Cook & hold
C. More (+)/less (-) buttons		G. Clock				K. Broil
D. Timer		H. Delay (on self-clean models)

Display

When power is supplied to the range or after a power interruption, the last clock time before power was interrupted will flash.

Bake or Lock may flash rapidly in the display to alert you if there is an error or problem. Press CANCEL and reset clock if needed.

When the oven is in use, the display shows the temperature and oven setting.

When the oven is not in use, the display shows the time of day.

When using the TIMER, for settings of 1 to 59 minutes, the display will count down in minutes. For settings of 1 hour or more, the display will count down hours and minutes.

Cancel

The CANCEL button stops any function except the Clock, Timer and Control Lock. When you press the CANCEL button, the display will show the time of day, or the time remaining if the TIMER is being used.

Clock

The clock can be set to display time in a 12-hour or 24-hour format. The clock is set at the factory for the 12-hour format.

To recall the time of day when another time function is showing, press the Clock pad.

Clock time cannot be changed when the oven has been programmed for Delay Cook, Clean, or Cook & Hold.

To Change the Clock to 24-hour Format:

1.Press and hold CANCEL and DELAY for 3 seconds.

2.Press the “up” or “down”’ arrow pad to select 24 hour.

To Set:

1.Press CLOCK. The colon will flash in the display.

2.Press the “up” or “down”’ arrow pads to set the time of day.

3.Press CLOCK or wait 4 seconds. The colon stops flashing.