Check Operation of Cooktop Burners

1.If control panel and knobs were removed earlier, reinstall knobs.

2.Push in and turn each surface unit control knob to the “LITE” position. The flame should light within 4 seconds.

OFF

LITE

MED

3.Turn control knob to the “HI” position after burner lights.

4.Check each cooktop burner for proper flame. The small inner cone should have a very distinct blue flame ¼" (0.64 cm) to ½" (0.13 cm) long. The outer cone is not as distinct as the inner cone.

A. Outer cone

B. Inner cone

5.Turn the control knob quickly to the “LO” position after the burner lights. If the flame goes out, turn the control knob to the “OFF” position.

6.Check each cooktop burner for proper low flame. The low flame should be a minimum, steady blue flame. The flame size should be ¼" to ³⁄₈" (0.64 cm to 0.95 cm) high.

If the low flame needs adjusting:

1.With the burner flame on, turn control knob to the “LO” position and remove control knob.

2.Insert a small flat-blade screwdriver into the valve stem. Turn the valve adjusting screw to obtain the smallest flame that will not go out when the control of a cold burner is quickly turned from “HI” to “LO.” Turn right to decrease flame height. Turn left to increase flame height. Repeat for other cooktop burners as needed.

A. Valve stem

3.Replace control knob.

Check Operation of Oven/Broil Burner

1.Open broiler door.

2.Press in and turn the oven control knob to 350°F.

OFF

140

170

200

BROIL

	250	350
	250
	300	450
	350	450
	350	400
		400
	OVEN TEMP

■The oven pilot should now be larger with the flame burning against a small metal bulb.

■The oven burner should light in 20-40 seconds; this delay is normal. The oven valve requires a certain time before it will open and allow gas to flow.

To avoid damaging the hot surface igniter, do not insert any object into the openings of the shield that surrounds the igniter. Do not clean that area.

3.Check the oven burner for proper flame. The flame should be ½" (0.13 cm) long, with inner cone of bluish-green. The outer mantle should be dark blue and should be clean and soft in character. No yellow tips (not enough air), blowing or lifting (too much air) of flame should occur.

If the flame needs adjusting:

1.Turn the oven off. Wait for the oven burner to cool down.

2.Open oven door and remove oven racks, oven tray, and flame spreader and set aside.

A. Oven tray (lift up at area shown to remove)

B.Screws

C.Flame spreader

3.Locate the air shutter near the rear wall of oven and loosen the shutter screw.

A. Shutter screw

B. Air shutter

4.Adjust the air shutter.

5.Turn the oven back on and check for proper flame. If the flame is still not properly adjusted, turn the oven off, wait for the oven burner to cool down and repeat Step 4 until flame is properly adjusted.

6.When the flame has been properly adjusted, turn the oven off

and wait for the burner to cool down.

W10459123B specifications

The Whirlpool W10459123B is a sophisticated and versatile appliance designed to enhance the cooking experience in the modern kitchen. This appliance marries convenience with innovative technology, making it a great addition for both experienced chefs and novices alike.

One of the main features of the W10459123B is its intuitive control panel. Equipped with user-friendly buttons and a digital display, this appliance allows for easy navigation through various cooking settings. Whether you're baking, broiling, or roasting, users can effortlessly adjust temperature and cooking time to achieve desired results.

The W10459123B is also designed with a spacious interior, allowing for larger dishes and multiple servings at once. This is especially useful for families or individuals who enjoy entertaining guests. The even cooking technology ensures that heat is distributed uniformly throughout the cavity, minimizing the chances of hot or cold spots.

Energy efficiency is another highlight of the W10459123B. The appliance incorporates advanced insulation and sensor technology, enabling it to maintain optimal cooking temperatures while using minimal energy. This feature not only helps reduce monthly utility bills but also makes it an environmentally friendly choice for consumers looking to decrease their carbon footprint.

Additional features include a self-cleaning function, which saves time and effort when it comes to maintenance. Users can simply select the self-clean option, and the appliance will take care of the rest, breaking down food residues and spills with minimal manual intervention.

Safety is a top priority with the W10459123B, which includes features like a child lock function to prevent unintended use. The appliance is built with high-quality materials, ensuring durability and longevity, making it a worthwhile investment for any kitchen.

Overall, the Whirlpool W10459123B is a well-rounded appliance that combines functionality, technology, and convenience. Its impressive features and practicality make it an excellent choice for anyone looking to elevate their cooking experience, whether for everyday meals or special occasions. With this appliance in your kitchen, you can enjoy the benefits of advanced cooking technology while achieving delicious results every time.