Installation Instructions, Unpack Range

INSTALLATION INSTRUCTIONS

Unpack Range

WARNING

Excessive Weight Hazard

Use two or more people to move and install range. Failure to do so can result in back or other injury.

1.Do not use oven door handle to lift or move the range

2.Remove shipping materials, tape and film from range. Keep cardboard bottom under range.

3.Remove oven racks and parts package from inside oven.

4.To place range on its back, take 4 cardboard corners from the carton. Stack one cardboard corner on top of another. Repeat with the other 2 corners. Place them lengthwise on the floor behind the range to support the range when it is laid on its back.

5.Using 2 or more people, firmly grasp the range and gently lay it on its back on the cardboard corners.

6.Pull cardboard bottom firmly to remove.

7.Use an adjustable wrench to loosen the leveling legs. Adjust the leveling legs to the correct height. Leveling legs can be loosened to add up to a maximum of 1" (2.5 cm). A minimum of ³⁄₁₆" (0.5 cm) is needed to engage the anti-tip bracket.

NOTE: If height adjustment is made when range is standing, tilt the range back to adjust the front legs, then tilt forward to adjust the rear legs.

8.Place cardboard or hardboard in front of range. Using 2 or more people, stand range back up onto cardboard or hardboard.

Install Anti-Tip Bracket

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Install anti-tip bracket to floor or wall per installation instructions.

Slide range back so rear range foot is engaged in the slot of the anti-tip bracket.

Re-engage anti-tip bracket if range is moved.

Do not operate range without anti-tip bracket installed and engaged.

Failure to follow these instructions can result in death or serious burns to children and adults.

1.Remove the anti-tip bracket from where it is attached inside the oven with a wire tie.

2.Determine which mounting method to use: floor or wall.

If you have a stone or masonry floor, you can use the wall mounting method. If you are installing the range in a mobile home, you must secure the range to the floor.

3.Determine and mark centerline of the cutout space. The mounting can be installed on either the left side or right side of the cutout. Position mounting bracket against the wall in the cutout so that the V-notch of the bracket is 7⁷⁄₈" (20 cm) from centerline as shown.

Centerline

A. 7⁷⁄₈" (20 cm)

B.Bracket V-notch

4.Drill two ¹⁄₈" (3 mm) holes that correspond to the bracket holes of the determined mounting method. See the following illustrations.

Floor Mounting

Rear position

Front position

Diagonal (2 options)

Wall Mounting

5.Using the Phillips screwdriver, mount anti-tip bracket to the wall or floor with the two #12 x 1⁵⁄₈" screws provided.

6.Move range close enough to opening to allow for final gas and electrical connections. Remove shipping base, cardboard or hardboard from under range.

7.Move range into its final location, making sure rear leveling leg slides into anti-tip bracket.

8.Move range forward onto shipping base, cardboard or hardboard to continue installing the range using the following installation instructions.

W10459123B specifications

The Whirlpool W10459123B is a sophisticated and versatile appliance designed to enhance the cooking experience in the modern kitchen. This appliance marries convenience with innovative technology, making it a great addition for both experienced chefs and novices alike.

One of the main features of the W10459123B is its intuitive control panel. Equipped with user-friendly buttons and a digital display, this appliance allows for easy navigation through various cooking settings. Whether you're baking, broiling, or roasting, users can effortlessly adjust temperature and cooking time to achieve desired results.

The W10459123B is also designed with a spacious interior, allowing for larger dishes and multiple servings at once. This is especially useful for families or individuals who enjoy entertaining guests. The even cooking technology ensures that heat is distributed uniformly throughout the cavity, minimizing the chances of hot or cold spots.

Energy efficiency is another highlight of the W10459123B. The appliance incorporates advanced insulation and sensor technology, enabling it to maintain optimal cooking temperatures while using minimal energy. This feature not only helps reduce monthly utility bills but also makes it an environmentally friendly choice for consumers looking to decrease their carbon footprint.

Additional features include a self-cleaning function, which saves time and effort when it comes to maintenance. Users can simply select the self-clean option, and the appliance will take care of the rest, breaking down food residues and spills with minimal manual intervention.

Safety is a top priority with the W10459123B, which includes features like a child lock function to prevent unintended use. The appliance is built with high-quality materials, ensuring durability and longevity, making it a worthwhile investment for any kitchen.

Overall, the Whirlpool W10459123B is a well-rounded appliance that combines functionality, technology, and convenience. Its impressive features and practicality make it an excellent choice for anyone looking to elevate their cooking experience, whether for everyday meals or special occasions. With this appliance in your kitchen, you can enjoy the benefits of advanced cooking technology while achieving delicious results every time.