Verify Anti-Tip Bracket Location

5.Close the broiler door.

6.Remove cooktop burner caps and grates from parts package. Align notches in burner caps with pins in burner base. Burner caps should be level when properly positioned. If burner caps are not properly positioned, surface burners will not light. Place burners, burner caps and grates on the cooktop.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

7.Plug into a grounded 3 prong outlet.

1.Check that the anti-tip bracket is installed:

■Look for the anti-tip bracket securely attached to the floor.

■Slide the range back so the rear range foot is under the anti- tip bracket.

Level Range

1.Place rack in oven.

2.Place level on rack and check levelness of range, first side to side; then front to back.

3.If range is not level, pull range forward until rear leveling leg is removed from the anti-tip bracket. Use ³⁄₈" drive ratchet and wrench or pliers to adjust leveling legs up or down until range is level.

4.Push range back into position.

5.Check that rear leveling leg is engaged in anti-tip bracket.

NOTE: Range must be level for satisfactory baking performance.

Electronic Ignition System

Initial lighting and gas flame adjustments

Cooktop and oven burners use electronic igniters in place of standing pilots. When the cooktop control knob is turned to the “LITE” position, the system creates a spark to light the burner. This sparking continues until the control knob is turned to the desired setting.

When the oven control is turned to the desired setting, a hot surface igniter heats to a bright orange and ignites the gas. No sparking occurs. The glow bar remains on while the burner operates.

Check Operation of Cooktop Burners

1.If control panel and knobs were removed earlier, reinstall knobs.

2.Push in and turn each surface unit control knob to the “LITE” position. The flame should light within 4 seconds.

OFF

LITE

MED

3.Turn control knob to the “HI” position after burner lights.

4.Check each cooktop burner for proper flame. The small inner cone should have a very distinct blue flame ¼" (0.64 cm) to ½" (0.13 cm) long. The outer cone is not as distinct as the inner cone.

A. Outer cone

B. Inner cone

5.Turn the control knob quickly to the “LO” position after the burner lights. If the flame goes out, turn the control knob to the “OFF” position.

6.Check each cooktop burner for proper low flame. The low flame should be a minimum, steady blue flame. The flame size should be ¼" to ³⁄₈" (0.64 cm to 0.95 cm) high.

If the low flame needs adjusting:

1.With the burner flame on, turn control knob to the “Lo” setting and remove control knob.

W100329708 specifications

The Whirlpool W100329708 is a versatile and efficient appliance designed to enhance the functionality of modern kitchens. This high-quality product combines advanced technology with user-friendly features, making it an essential addition for homeowners seeking reliability and convenience in their cooking and cleaning tasks.

One of the standout features of the W100329708 is its innovative design, which offers ample storage space while maintaining a sleek and stylish appearance. The appliance is equipped with adjustable shelves that allow for flexible organization, catering to various sizes of cookware and food items. This adaptability is particularly beneficial in busy kitchens where space optimization is crucial.

Another key characteristic of the W100329708 is its energy efficiency. Designed with environmentally conscious consumers in mind, this appliance meets stringent energy standards, ensuring reduced power consumption without sacrificing performance. This not only helps users save on utility bills but also contributes to a more sustainable household.

The W100329708 also incorporates cutting-edge technology to simplify kitchen tasks. With a range of automatic settings, including pre-programmed cycles, users can enjoy hassle-free cooking experiences. The intuitive controls make it easy to select the desired settings, whether for baking, steaming, or reheating, ensuring that every dish is cooked to perfection.

Durability is another hallmark of the Whirlpool W100329708. Constructed with high-quality materials, this appliance is built to withstand the rigors of daily use. Its robust design ensures longevity, making it a wise investment for any kitchen. Moreover, Whirlpool is known for its excellent customer support and warranty policies, giving buyers peace of mind regarding their purchase.

In terms of maintenance, the W100329708 is designed for easy cleaning. Its smooth surface and removable components make it straightforward to maintain, thereby reducing the hassle often associated with kitchen appliances.

In conclusion, the Whirlpool W100329708 is a state-of-the-art appliance that combines style, efficiency, and durability. With its user-friendly features, energy-saving technology, and exceptional build quality, it is an ideal choice for modern kitchens, enhancing both functionality and aesthetic appeal. Whether you are a seasoned chef or someone who enjoys cooking occasionally, this appliance caters to all levels of culinary expertise, making meal preparation an enjoyable experience.