Installation Instructions, Unpack Range

Line pressure testing above ½ psi gauge (14" WCP)

Burner Input Requirements

Input ratings shown on the model/serial rating plate are for elevations up to 2,000 ft (609.6 m).

For elevations above 2,000 ft (609.6 m), ratings are reduced at a rate of 4% for each 1,000 ft (304.8 m) above sea level (not applicable for Canada).

Gas Supply Pressure Testing

Gas supply pressure for testing regulator must be at least

1" water column pressure above the manifold pressure shown on the model/serial rating plate.

The range and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of ½ psi (3.5 kPa).

Line pressure testing at ½ psi gauge (14" WCP) or lower

The range must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ psi (3.5 kPa).

INSTALLATION INSTRUCTIONS

Unpack Range

WARNING

Excessive Weight Hazard

Use two or more people to move and install range. Failure to do so can result in back or other injury.

1.Do not use oven door handle to lift or move the range

2.Remove shipping materials, tape and film from range. Keep cardboard bottom under range.

3.Remove oven racks and parts package from inside oven.

4.To place range on its back, take 4 cardboard corners from the carton. Stack one cardboard corner on top of another. Repeat with the other 2 corners. Place them lengthwise on the floor behind the range to support the range when it is laid on its back.

5.Using 2 or more people, firmly grasp the range and gently lay it on its back on the cardboard corners.

6.Pull cardboard bottom firmly to remove.

7.Use an adjustable wrench to loosen the leveling legs. Adjust the leveling legs to the correct height. Leveling legs can be loosened to add up to a maximum of 1" (2.5 cm). A minimum of ³⁄₁₆" (0.5 cm) is needed to engage the anti-tip bracket.

NOTE: If height adjustment is made when range is standing, tilt the range back to adjust the front legs, then tilt forward to adjust the rear legs.

8.Place cardboard or hardboard in front of range. Using 2 or more people, stand range back up onto cardboard or hardboard.

Install Anti-Tip Bracket

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

Failure to follow these instructions can result in death or serious burns to children and adults.

Contact a qualified floor covering installer for the best procedure for drilling mounting holes through your type of floor covering.

Before moving range, slide range onto shipping base, cardboard or hardboard.

1.Remove template from the anti-tip bracket kit (found inside the oven cavity).

2.Place template on the floor in cabinet opening so that the left edge is against cabinet and top edge is against rear wall, molding or cabinet.

3.Tape template into place.

4.If countertop is not flush with cabinet opening edge, align template with overhang.

W100329708 specifications

The Whirlpool W100329708 is a versatile and efficient appliance designed to enhance the functionality of modern kitchens. This high-quality product combines advanced technology with user-friendly features, making it an essential addition for homeowners seeking reliability and convenience in their cooking and cleaning tasks.

One of the standout features of the W100329708 is its innovative design, which offers ample storage space while maintaining a sleek and stylish appearance. The appliance is equipped with adjustable shelves that allow for flexible organization, catering to various sizes of cookware and food items. This adaptability is particularly beneficial in busy kitchens where space optimization is crucial.

Another key characteristic of the W100329708 is its energy efficiency. Designed with environmentally conscious consumers in mind, this appliance meets stringent energy standards, ensuring reduced power consumption without sacrificing performance. This not only helps users save on utility bills but also contributes to a more sustainable household.

The W100329708 also incorporates cutting-edge technology to simplify kitchen tasks. With a range of automatic settings, including pre-programmed cycles, users can enjoy hassle-free cooking experiences. The intuitive controls make it easy to select the desired settings, whether for baking, steaming, or reheating, ensuring that every dish is cooked to perfection.

Durability is another hallmark of the Whirlpool W100329708. Constructed with high-quality materials, this appliance is built to withstand the rigors of daily use. Its robust design ensures longevity, making it a wise investment for any kitchen. Moreover, Whirlpool is known for its excellent customer support and warranty policies, giving buyers peace of mind regarding their purchase.

In terms of maintenance, the W100329708 is designed for easy cleaning. Its smooth surface and removable components make it straightforward to maintain, thereby reducing the hassle often associated with kitchen appliances.

In conclusion, the Whirlpool W100329708 is a state-of-the-art appliance that combines style, efficiency, and durability. With its user-friendly features, energy-saving technology, and exceptional build quality, it is an ideal choice for modern kitchens, enhancing both functionality and aesthetic appeal. Whether you are a seasoned chef or someone who enjoys cooking occasionally, this appliance caters to all levels of culinary expertise, making meal preparation an enjoyable experience.