Whirlpool UXT5230AYB, UXT5230AYS Installation Instructions, Prepare Location, To wire through top

Page 7

INSTALLATION INSTRUCTIONS

Prepare Location

NOTE: It is recommended that the vent system be installed before hood is installed.

Before making cutouts, make sure there is proper clearance within the ceiling or wall for exhaust vent.

1.Disconnect power.

2.Depending on your model, determine which venting method to use: roof, wall or non-vented (recirculating).

3.Select a flat surface for assembling the range hood. Place covering over that surface.

4.Lift the range hood and set it upside down onto covered surface.

5.If cabinet has recessed bottom, add wood filler strips on each side. Install screws to attach filler strips in locations shown.

Wood filler strips (recessed cabinet bottoms only)

3" (7.6 cm)

Cabinet

bottom

3" (7.6 cm)

Wall

To wire through top:

1.Mark a line distance “A” from the right of the centerline on the underside of the cabinet. Mark the point on this line that is ⁷⁄₈" (2.2 cm) from back wall. Drill a 1¼" (3.2 cm) diameter hole through the cabinet at this point.

A

⁷⁄₈" (2.2 cm)

 

from wall,

 

not cabinet

 

frame

Centerline

A. 8³⁄₈" (21.3 cm) for 30" (76.2 cm) models 11³⁄₈" (28.9 cm) for 36" (91.4 cm) models

To wire through wall:

1.Mark a line distance “A” from the right of the centerline on the underside of the wall. Mark the point on this line that

is ⁷⁄₈" (2.2 cm) from the underside of the cabinet. Drill a

1¹⁄₄" (3.2 cm) diameter hole through the rear wall at this point.

Determine Wiring Hole Location

Cut only one 1¹⁄₄" (3.2 cm) diameter wiring access hole. See Step 2 for wiring hole location instructions.

1.Determine and clearly mark a vertical centerline on the wall and cabinet in the area the vent opening will be made.

A

A.Centerline

⁷⁄₈" (2.2 cm)

A

Centerline

A. 8³⁄₈" (21.3 cm) for 30" (76.2 cm) models 11³⁄₈" (28.9 cm) for 36" (91.4 cm) models

Style 1 - Cut Openings for 3¼" x 10" (8.3 cm x 25.4 cm) Rectangular Vent System

Roof Venting

To make a 4¹⁄₄" x 10½" (10.8 cm x 26.7 cm) rectangular cutout on the underside of cabinet top and bottom:

1.Mark lines ¹⁄₂" (1.3 cm) and 4³⁄₄" (12.1 cm) from the back wall on the centerline of the underside of cabinet.

2.Mark lines 5¼" (13.3 cm) to the right and left of the centerline on the underside of cabinet.

3.Use saber or keyhole saw to cut a rectangular opening for vent.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Hotte D’ASPIRATION DE Table of Contents Range Hood SafetyImportant Safety Instructions Tools and Parts Installation RequirementsLocation Requirements Makeup Air Installation ClearancesCold Weather Installations Venting RequirementsExample vent system Electrical RequirementsCalculating Vent System Length Cm Round Vent SystemDetermine Wiring Hole Location Installation InstructionsTo wire through top To wire through wallTo make a 3½ x 10½ 8.9 cm x 26.7 cm rectangle in the wall Install Vent SystemWall Venting Style 3 Cut Openings for 7 17.8 cm Round VentInstall Range Hood Power Supply Cable Installation Make Electrical Connection Complete InstallationRange Hood Controls CleaningRange Hood USE Range Hood CareReplacing the Halogen Lamp To Replace the FilterSE119A Wiring DiagramCanada Assistance or ServiceAccessories U.S.AThis limited warranty does not cover Whirlpool Corporation Major Appliance WarrantyVotre sécurité et celle des autres est très importante Sécurité DE LA Hotte DE CuisinièreImportantes Instructions DE Sécurité Exigences demplacement Exigences DinstallationOutils et pièces Air d’appoint Installations dans les régions au climat froidExigences concernant l’évacuation Distances de dégagement à respecterSystème dévacuation avec conduits ronds de 7 17,8 cm Exemple de circuit d’évacuationSystème de décharge de 3¹⁄₄ x 10 8,3 cm x 25,4 cm Calcul de la longueur du circuit d’évacuationSpécifications électriques Instructions D’INSTALLATIONPréparation de lemplacement Déterminer l’emplacement du trou de passage du câbleÉvacuation par le mur Câblage à travers le sommet du placardPassage du câble à travers le mur Cm x 25,4 cm Décharge à travers le toitInstallation du conduit d’évacuation Installation de la hotteDécoupe en trou de serrure Installation sans décharge à l’extérieur recyclage Installation du cordon dalimentationRaccordement électrique Achever l’installationEntretien DE LA Hotte Commandes de la hotte de cuisinièreNettoyage Remplacement de la lampe à halogène Remplacement du filtreCaractéristiques du moteur Schéma DE CâblageAu Canada Assistance OU ServiceAccessoires Garantie DES Gros Appareils Ménagers Whirlpool CorporationW10400323D

UXT5236AYS, UXT5230AYB, UXT5230AYS specifications

The Whirlpool UXT5230AYS, UXT5230AYB, and UXT5236AYS are three highly regarded under-cabinet range hoods that blend contemporary design with cutting-edge technology, aiming to enhance the efficiency and aesthetics of modern kitchens. Each model is designed to provide powerful ventilation while maintaining a streamlined appearance, complementing various kitchen styles.

One of the standout features of these range hoods is their robust airflow capacity, which effectively removes smoke, odors, and steam produced while cooking. With a maximum CFM (cubic feet per minute) rating of 190, these models ensure that your kitchen remains fresh and free from lingering smells. The adjustable fan speeds offer the flexibility needed to match the ventilation power with the intensity of your cooking, ensuring optimal performance for both light and heavy-duty culinary tasks.

The UXT5230AYS and UXT5230AYB models come equipped with a convenient push-button control system. This user-friendly interface makes it easy to adjust fan speeds and turn the hood's lights on and off, providing hassle-free operation while cooking. Additionally, the UXT5236AYS features similar controls but with an enhanced design aesthetic to cater to various consumer preferences.

Lighting is crucial in the kitchen, and these range hoods do not disappoint with their bright, energy-efficient LED lighting. This lighting casts a clear beam over your cooking surfaces, making food preparation safer and more enjoyable. The longevity of LED lights minimizes the need for frequent replacements, making these hoods a cost-effective choice in the long run.

Maintenance has been simplified as well, with stainless steel baffle filters that are both durable and easy to clean. These filters capture grease effectively while adding a sophisticated touch to the hood’s design. They are dishwasher safe, allowing for effortless cleaning without the risk of damage.

In terms of installation, the UXT5230AYS and UXT5230AYB models have a slim profile, making them ideal for kitchens with limited space. Each unit is designed to fit comfortably under cabinets while providing sufficient coverage over cooking surfaces.

Overall, the Whirlpool UXT5230AYS, UXT5230AYB, and UXT5236AYS range hoods stand out in terms of performance, design, and functionality. They are excellent choices for homeowners looking to enhance their kitchen's ventilation and overall efficiency while enjoying the benefits of modern technology and stylish aesthetics.
Top Page Image Contents