Using your range
TOP LIGHT | LOWER OVEN | OVEN SELECTOR | OVEN LIGHT |
SWITCH | TEMPERATURE |
|
|
I | CONTROL |
|
|
/ |
|
|
| / | I |
| \ | \ |
LEFl FRONT | LEFl REAR | SURFACE | RIGHT REAR | RIGHT FRONT | |
CONTROL | KNOB | CONTROL KNOB | BURNER | CONTROL KNOB | CONTROL KNOB |
|
|
| INDICATORS |
|
|
Using the Surface
Burners
Surface Burner Indicators
Control knobs must be pushed in, then turned to the LITEposition. The clicking sound is the ignition sparking.
To stop the clicking sound after the burner lights, turn the control knob back to a desired setting. The control knob has stops for HI, MED and LOW, however it can be set anywhere be- tween HI and OFF. Do not cook with the control in the LITE position.
The solid dot in the surface burner in- dicator shows which surface burner is turned on by that knob.
In Case of a Prolonged Power Failure
Surface burners can be manually lighted. Hold a lighted match near a burner and turn the control to the LITEposition. After the burner lights, turn the control to the desired setting.