Whirlpool RF387PXW manual CaringForYourRange, Controlpanelandknobs

CaringForYourRange

Burn and Electrical Shock Hazard

Solid element surface units do not glow red when hot. Make sure all controls are OFF and the range is COOL before cleaning. Failure to do so can result in burns or electrical shock.

Controlpanelandknobs

	1. Pull control knobs and command
	buttons straight	off.
	2. Use warm soapy water and a soft
	cloth, or spray glass cleaner, to
	wipe the control panel. Rinse and
	wipe dry.
	3. Wash control knobs and command
	buttons in warm soapy water. Rinse
	well and dry. Do not soak.
	4. Push control knobs and command
	buttons straight back on. Make sure
	control knobs point to OFF. Make
	sure buttons have not turned oven
	ON. If oven has been turned on,
	push Oven Off button.
	Solidelementsurfaceunits
w	1. For best results, wipe off surface
	units with a damp sofl cloth and
	soapy water after	each use. Burned-
	on food may be removed with a
	soapy scouring pad. The red spot in
	the center of the surface unit will
	gradually wash off. This is normal
/	and will not affect the operation of
	the surface unit.
	2. IMPORTANT: After cleaning, apply
	a thin coat of salt-free oil to the
	COOL surface units, then heat 3-5
	minutes. It may still smoke slightly
	when heated. If surface units have
	dark spots caused by grease and
	food, the oil treatment will improve
	their appearance but not eliminate
	the spots.
	NOTE: Optional	Electrola dressing

can be applied to the surface units to improve their appearance.

17