Theovenlight, To replace the oven light

Caring For Your Range

Continued

Theovenlight

The oven light will come on when you open the oven door. To turn the light on when the oven door is closed, push the Oven Light Switch on the control panel. Push the switch again to turn off the light.

Electrical Shock and

Personal Injury Hazard Make sure oven and light bulb are cool and power to the oven has been turned OFF before replacing the light bulb. Failure to do so could result in elec- trical shock or burns.

The bulb cover must be in place when using the oven. The cover protects the bulb from breaking, and from high oven tempera- tures. Broken glass could cause injury.

To replace the oven light:

1.Unplug appliance or disconnect at main power supply.

2.Remove the bulb cover in the back of the oven by pulling out and pushing the wire holder to the side.

3.Remove the light bulb from its socket. Replace the bulb with a 40 watt appliance bulb.

4.Replace the bulb cover and snap the wire holder in place. Plug in appliance or reconnect at main power supply.

NOTE: The oven light will not work during the Self-Cleaning cycle.