Cleaningtips

Caring For Your Range

Continued

How it works

Dunng the Self-Cleaning cycle, the oven gets much hotter than It does for baking or broiling. .approximately 875°F (468°C) This heat breaks up grease and soil and burns it off.

This graph shows approximate temperatures and times during a Self-Cleaning cycle for 3 hours.

Self-Cleaning cycle-three hour setting

(Approximate temperatures and times)

1000°F							536 c
600°F							427’C
6OO’F							316°C
4OO’F							204%
2OO’~F							93%
START	‘12hr	1 hr	1’2 hrs	2 hrs	21’2 hrs	3 hrs	31% hrs STOP

Notice that the heating stops when the 3-hour setting is up, but that it takes longer for the oven to cool down enough to unlock

Control knobs

Clean with warm soapy water and a soft cloth.

lWash, rinse and dry well. l Do not soak.

Control panel

Clean with warm soapy water or spray glass cleaner and a soft cloth.

lWash, rinse and dry well.

l Follow directions provided with the cleaner.

Surface units (Solid elements)

Clean with warm soapy water on a soft cloth.

lMake sure the cooktop and the sur- face units are cool.

Clean with soapy scouring pad or scouring powder.

lWipe off the surface units after each use.

NOTE: After each cleaning, heat surface units until dry.

To darken surface units or to remove rust spots:

Use salt-free oil on a soft cloth.

lMake sure surface units are cool.

l After each cleaning, apply thin coat of oil to surface units, then heat for 3-5 minutes. Slight smoking of oil will occur.

Use ElectroI’* dressing (Part No. 814030)’

lFollow the directions on the dressing.

NOTE: This will improve surface unit appearance, but will not eliminate dark spots.

‘See page 18 for ordering information.