Whirlpool RF390PXP manual Setting, For Self- Cleaning

Setting		the	Clontrols	for Self- Cleaning						I
Be sure	the	kitchen	Is ventilate	ed	during the	Self-Cleanlng	cycle.	Thls	will	help
normal	smoke and I heat odor			s to	dlsappec	3r from the room	as	aulcklv	as	Dosslble ’

1.Set the Oven Selector and the Oven Temperature Control on

CLEAN.

3.Push in and release the Self-Clean Button. A J-hour Self-Cleaning cycle will be set automatically.

The display will count down the time in minutes. The Auto Oven Light and Self-Clean Signal Light will stay on.

If a cleaning cycle other than

3 hours is desired, push in and hold the Bake Hours Button and turn the Set Time Knob to the new time up to 4 hours.

lUse 2 hours for light soil.

lUse 3 hours or more for moder- ate to heavy soil.

2.Move the Lock Lever to the Clean Position. The Clean Light will come on only when the lever is all the way to the right.

4.The Lock Light will come on when the oven temperature exceeds normal baking temperatures. The Lock Lever must not be moved

and the door can’t be opened
when the light is on.	I
NOTE: The Stop Tlme signal ilght
will flash during the entire clean
cycle.

5.After the cleaning cycle is

completed, the Auto Oven and Self-Clean Lights will go off. The display will show the time of day. When the Lock Light goes off, move the Lock Lever back to the Cook Position. Do not force it. Wait until it moves easily. This turns off the Clean Light. Turn the Oven Selector and the Oven Tempera- ture Control to OFF:

continued on next page