The storage drawer
The storage drawer is for storing pots and pans. The drawer can be removed to make it easier to clean under the range, and to check for installation of the anti- tip brackets. Use care when handling the drawer.
Removing the storage drawer:
Replacing the storage drawer: | To verify | that the |
| bracket(s) | is engaged: |
Levi&
1.Empty drawer of any pots and pans before removing drawer. Pull drawer straight out to the stop.
2.Push up plastic lever on both sides of drawer.
3.Pull drawer out a little farther until levers stay in “up” position. Pull drawer the rest of the way out.
1.Make sure ball bearings on oven slide rail are positioned toward the front of the opening.
2.Fit ends of drawer slide rails into the oven slide rails on both sides of opening.
3.Slide drawer closed.
1 Remove storage drawer.
1 Look to see if the
. Make sure rear leveling leg(s) is positioned under bracket(s).
mSee “Important Safety Instructions” on page 2 and Installation Instructions for further details.
NOTE: The range will not tip during normal use. Tipping can occur if excessive force or weight is applied to open door without
Page 8